HamBone

I have 10, 30-gallon barrels for sale located in a distillery in Astoria, OR. They are charred to a 3. Pickup only- that's why I'll let them all go for $2,000. Thanks, John

Hi Bev, I sent you an email. If you don't get it you can email me directly at johnrobben1@me.com

The Still is in Oregon

Yes this is din. This is not ASD, but it's from their manufacturer, DIN was a special request.

I have a 300 (330 total) gallon copper and SS Still for sale. Never used as I wasn't able to get distillery off the ground Asking $29,500 4 plates, all with CIP and bypass and 100% copper. Dephlegmator, electronic water controls flow oil jacketed. It's just over 12' height, 12" column.

no it does not make much dust.

THis is a 220V. I had an electrician wire in the source (same as a dryer). Cost was $165 for the wiring

yes

I have the grain Mill located in Portland, OR. I am selling because I did not get my official distillery off the ground. It new and in perfect working order. I ran one bag or grain through when I received it to test it out, and nothing else. I wront stone Burr Mill and it's a Steel burr mill. thanks, John

Meadows 8 Inch Stone Burr Mill The 8 inch stone burr mill is mounted on the top of the steel table. Flour falls from the mill housings through the 5 inch diameter outlet into your bag or brute. The electric motor is mounted next to the stone burr mill on the top of the table. A guard covers the belt drive. The dimensions of the Assembly C are 34 inches (length) x 32 inches (width) x 57 inches (height). Comes with the 24" steel casters. This is brand new. Ran 10 pounds grain through it once just to test it out when it arrived. This will grind anything from a roller mill gentle crack of the grain or a hammer mill- flour total adjustment at your control. Purchased with shipping for about $3500- selling for $2500

If I missed an email or someone is wanting to know more- please email me directly at jecakes@yahoo.com thanks, John

Heating elements power: 48KW It is a 3-phase, 220V. I believe this is the same as an electric american dryer outlet

This is the same Still. I've re-posted a couple times. Sorry if I missed a question. John

yes includes the 6 elements. Oil jacketed electric still. Also, yes has the controller box. It's a 3-phase, 220V

I have a 300 gallon copper and SS Still for sale. Never used as I wasn't able to get distillery off the ground 2 plates, all with CIP and bypass Dephlegmator, electronic water controls flow oil jacketed. It's just over 12' height, 12" column. asking $35,000 for quick sale.

Is this a half-hearted joke? a $1 million revenue business is not worth $5 million sale, unfortunately.

Hi, We have a 4 plate 330 gallon new Still for sale. This is new and we have another we are using for our needs. Column is Copper with 4 bubble cap plates. All 4 plates have bypass valves plus built in CIP This is oil jacket, electric heat SS jacket. Has magnetic temp control computer, i.e. you set the desired temperatures and it'll automatically adjust water flow to maintain perfect and consistent temp for consistent proof of spirits. $41K is below what we paid, Freight shipping included in U.S. Dimensions: 12'7" height, 5'26" width, 11'8" length. Having trouble uploading Pictures. Email me for pics: johnrobben1@me.com

Hi, We have a 4 plate 330 gallon new Still for sale. This is new and we have another we are using for our needs. Column is Copper with 4 bubble cap plates. All 4 plates have bypass valves plus built in CIP This is oil jacket, electric heat SS jacket. Has magnetic temp control computer, i.e. you set the desired temperatures and it'll automatically adjust water flow to maintain perfect and consistent temp for consistent proof of spirits. $41K is below what we paid, Freight shipping included in U.S. Dimensions: 12'7" height, 5'26" width, 11'8" length. Having trouble uploading Pictures. Email me for pics: johnrobben1@me.com

where you located? probably not worth cost with shipping.

Hi, not sure if you have moved ahead with your investment, but I think there are some more important questions to ask that don't have much to do with the mortgage and interest rate, and that's defining your return on investment. If you spend 450K on the business, can the profits from the business support the payment of that loan? If so, what is the margin left after the payment, and what's your expected return? 10% would be a typical minimum you'd want. Kannuk above hit some points well, and most of these can actually be preformed through doing some pivots with a little data analysis. Look at sales, revenue, and net profit. 3 million in revenue might sound enticing, but that doesn't mean the business doesn't actually lose money. Best of luck! John

This is a tough one mate. valuation on a startup distillery is hard because of the shear time it takes from "start" to actual "sales". A couple things to consider are: 1. What do you bring to operation? In terms of time and money. 2. What does other person bring to table? Are they putting in time? how much money? Pre-startup and revenue is almost impossible to decide, but time and money are the metrics. John

Yes. sounds like a good yield to me. Molasses can have up to 50% unfermentables, so you are doing well my friend.

Hi, We have a 4 plate 330 gallon new Still for sale. This is new and we have another we are using for our needs. Column is Copper with 4 bubble cap plates. All 4 plates have bypass valves plus built in CIP This is oil jacket, electric heat SS jacket. Has magnetic temp control computer, i.e. you set the desired temperatures and it'll automatically adjust water flow to maintain perfect and consistent temp for consistent proof of spirits. $44K is below what we paid, Freight shipping included in U.S. Dimensions: 12'7" height, 5'26" width, 11'8" length. Having trouble uploading Pictures. Email me for pics: johnrobben1@me.com

I PM'd you mate.

Hi, We have a 4 plate 330 gallon new Still for sale. This is new and we have another we are using for our needs. Column is Copper with 4 bubble cap plates. All 4 plates have bypass valves plus built in CIP This is oil jacket, electric heat SS jacket. Has magnetic temp control computer, i.e. you set the desired temperatures and it'll automatically adjust water flow to maintain perfect and consistent temp for consistent proof of spirits. $44K is below what we paid, Freight shipping included in U.S. Dimensions: 12'7" height, 5'26" width, 11'8" length. Having trouble uploading Pictures. Email me for pics: jecakes@yahoo.com