Jump to content

dwrich1020

Members
  • Posts

    24
  • Joined

  • Last visited

Recent Profile Visitors

741 profile views

dwrich1020's Achievements

Contributor

Contributor (2/3)

0

Reputation

  1. All barrels were entered at 125 proof. Haven't taken every one of them off the racks to measure but approximately 70% filled. About 875 proof gallons total.
  2. Approximately 1000 wine gallons of 5-7 year old bourbon distilled in Mississippi between 2016 and 2018. Two mash bills available, 66% corn/17% barley/17% rye and 66% corn/17%barley/17% wheat. $45,000
  3. 6 spout gravity bottle filling machine purchased originally from GW Kent. Used once for bottling one run of vodka. $1800
  4. Yes, I'd be happy to email plenty of pictures of everything to interested buyers.
  5. Distillery equipment and inventory for sale in Mississippi. Would be willing to sell distillery business outright with license to remain in current location or to be sold as a package to someone starting up. 7000 s.f. facility was built in 1880s and completely restored and renovated, with tasting room and on site package store. Also would be interested in sale of equity in business with current owner to remain involved in business operations. This is a great opportunity for someone to get up and running immediately, either in current location or with current equipment to be installed at your facility. Equipment and inventory only $200,000. Building and entire business operation and license, $700,000. 300 gallon stainless steel steam heated 4 plate copper pot/column hybrid still 300 gallon stainless steel steam heated mash cooker 8", 13' tall 12 plate stainless steel continuous stripping still 700,000 BTU/hr Burnham low pressure steam boiler 4-300 stainless steel open top fermenters 2" American Wine Flexible Impeller Pump 3-2" high temperature mash transfer hoses, various lengths Meadows Steel Burr Grist Mill 1-330 gallon stainless steel storage tank 8-55 gallon stainless steel drums 6-270 gallon food grade IBC totes 5000 lb Toyota Forklift 6 spout gravity bottle filling machine Race Taper Capable Labeling Machine Various hoses, clamps, pumps Solid hardwood tasting room furniture Approximately 1200 gallons of aged bourbon ready for immediate sale david@richdistilling.com 601-750-8221
  6. I have the exact same thing happen in my still any time I do grain in distillations. The inside of my lyne arm looks identical to that. My still is a stainless steel pot made from a square tote tank. It has steam jacketing on all four sides. During the course of the run, the liquid level inside the still drops obviously, but because the steam jacket goes to the top of all four sides, there is a portion of the side wall that remains heated above the level of the liquid. After a run, it isn't scorched, but there is a baked on caramelized ring around on the inside of the pot. During stripping runs, my output is pretty oily over the course of the entire run, but gets noticeably more oily toward the end of a run. Based on the solubility tests described earlier, would that mean it is some type of organic salt? That might make sense because the proof decreases over the run so whatever it is becomes less and less soluble over the run. I don't use any type of anti foaming ingredients. My recipes are either 100% ground corn converted with SebStarHTL and SebAmylGL, or bourbon made from ground corn, barley, and wheat, with addition of enzymes as well. I'd love to hear any other theories anybody might have.
  7. James, Meerkat, and Roger, thanks for all the replies and information. I've decided now to definitely use the boiler feedtank, and actually after looking at different models online, I may purchase the exact same one you are using James.
  8. This is a great topic, and thanks for all the information everyone has posted. I am in the process of hooking up my steam boiler and am trying to figure out all of the regulators, gauges, valves, and traps that I'll need. I'm using a Burnham 5011B natural gas fired boiler rated for 624,000 BTU/hr steam output. I have a 300 gallon mash cooker and a 300 gallon still. Based on all the information here, I'm confident that I have the correct size boiler for my application. I believe this boiler is commonly used in basements of homes that have radiant heaters in upper floors. The recommended piping diagram in the manual shows a gravity feed system using a Hartford loop. The normal water line of the boiler is 27" above the floor. The boiler, still tank, and mash cooker are on the same floor level and are only separated by a distance of about 8' with the boiler room wall separating the two. My main question is if anyone knows if I can get by without a condensate pump or a feedwater tank? The condensate outlet for both the mash cooker and still are only about 15" above the floor. By my reckoning, this would mean that the steam trap at the outlet of each tank wouldn't even work and there would water filled in my tank jacket up to the same level as the water in the boiler. Is this correct? It seems like I'd have water hammer in the bottom 9" or so of the steam jacket. My boiler didn't come with a feedwater tank. Is my solution as simple as buying a feedwater tank and mounting it up high in the boiler room and letting the pressure of the system push the condensate up to it?
  9. County Seat- Heat up time will be entirely dependent on the surface area that gets covered in heaters and the watt density of the heating pad, the volume of liquid being heated, amd the efficiency of the heating. Generally these style of heaters are designed for 2.5, 5, or 10 W/sq. In. If you had a 36" diameter tank, and had heating pads over the entire circumference that was 36" tall, the surface area would be about 4000 sq. In, so you could possibly have 40,000 W of heating. A 36" diameter tank that is 36" tall is about 150 gallons.If the tank was 4' tall it would hold 200 gallons. A good rule of thumb is 1000 BTU of heating per gallon of mash to get your still boiling in one hour. 40,000 W is equivalent to about 136,000 BTU/hr. If the heating was only about 80% efficient, the example outlined above might take an hour and a half to get the still boiling. That's a rough napkin calculation anyway on an estimated heating time.
  10. I have a suggestion. You could wrap the outside of the tank with flexible silicone rubber heating pads. This would work similar to a steam setup in that the entire outer surface area of the tank would be evenly heated. The heat then conducts through the wall of your tank into your mash. You'd need a layer of insulation on top of the heating pads. These pads are usually designed for 2.5, 5, or 10 W/in^2. Just estimating the size of your tank I'd say it was 4 feet in diameter by 3 feet tall of surface area, which works out to almost 300 gallons. If you wrapped the outer surface with a heating pad at 5 W/in^2, you would have at least 25,000 W of heating, or 50,000 W if you use a higher watt density heater. The electric service will be your most expensive thing if it can't already handle this capacity. I'm not a representative of this company, but I have used them before on a project in my former professional life as an engineer. There are certainly more manufacturers out there that make these type heaters. They have on their website an example used in food processing for holding a constant temperature of very viscous liquids at a constant temperature, almost what you are doing in mashing. http://www.michaelsenterprises.com/custom-heating-solution-food-processing.html
  11. Your analogy you keep going back to about propane tanks is faulty too by the way. The surface area at the top of the liquid there again isn't the driving factor in how much gas is produced. The driving factor there is the wetted surface area. That is the area of the side walls of the tank in contact with the liquid propane. The reason I'm giving you such a hard time is that you are a commercial still builder and you just demonstarted that you don't understand basic physical processes that govern a still's operation.
  12. YOU need to do an experiment. A wide shallow pot with an internal heating element vs a tall skinny pot with the same internal element. They are filled with the same volume of liquid and have the same diameter column. See which one produces product faster. The answer is they'll produce at the same speed. The surface area of liquid on the top is irrelevant!
×
×
  • Create New...