Search the Community
Showing results for tags 'bottling line'.
-
I'm looking for a lead on a bottle blower to use pre-fill, ideally something that works off a small air compressor. I am not worried about using water, just air. Some use both which would be okay too, I just wouldn't hook up water. I am having a surprisingly hard time finding a good solution. Thank you!
-
High quality equipment, budget prices. BOTTLING LINE FOR NON DENSE SPIRITS - 700 BpH OFFER : 9431-17 PRICE EX-WORKS - 36,540.00 TYPE OF MONOBLOCK: FILLING 6 VALVES - CAPPING 1-HEAD MODEL: 6-1 AV VARIABLE SPEED DEVICE: MECHANICAL VARIATOR LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY GRAVITY N° OF FILLING VALVES: 6 LIQUID THAT CAN BE USED: SPIRITS MAX PRODUCTION IN BPH: 700 x 0.75 lt DIAMETER OF THE BOTTLES: MIN/MAX 55/110 mm CAPPER FOR PLASTIC CAP: ALEXA AV NUMBER OF CAPPING HEADS: 1 TYPE OF CAP: ROPP ALUMINIUM SCREW CAP CLOSING HEAD: THREADING HEAD WITH 4 ROLLERS CAP FEED: BY MEANS OF A VIBRATING SYSTEM CAP SIZE: TO BE AGREED MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 6 -VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with GRAVITY system 2. SINGLE HEAD CAPPER - Vibrating hopper for cap selection - Cap chute with detection photocell - Distribution head - Threading head with 4 rollers and “no cap / no roll” system - Manual lifting for format change OPTIONS: CHANGE PARTS FOR DIFFERENT BOTTLES SIZES - 1,260.00 EXTRA-COST FOR WORKING 50 ml BOTTLE - 3,465.00 SET OF FILLING VALVES FOR 50 ml BOTTLE - 4,083.00 SET OF ACCESSORIES FOR ALUMINIUM ROPP CAP FOR 50 ml BOTTLE (vibrating hopper – cap chute – threading head) - 7,686.00 LOADING TURNING TABLE DIAM. 800 mm - 1,638.00 FINAL ACCUMULATION TURNING TABLE DIAM. 800 mm WITH MOTOVARIATOR - 2,142.00 PACKING 1,134.00 Uks, Inc 1712 Pioneer Ave, Suite 1409, Cheyenne, WY 82001 Phone: 1-307-316-7277 www.uksinc.com, info@uksinc.com, uksinc@aol.com, alsaint@outlook.com
-
- bottling line
- filler
-
(and 2 more)
Tagged with:
-
Ager Tank & Equipment Co. is located in Portland, Oregon where there is NO SALES TAX. We are able to offer competitive shipping rates for all our customers and have shipped to every part of the United States, Canada, and many parts of Mexico. A sample of our remaining inventory is listed below. The line consists of a 4 lane dump table/single filer with a side oscilator to prevent clustering. The rinser is a Poggio, standalone, 12 clamp machine. It is set up for air rinse and is capable of a secondary gas sparge. This machine was manufactured in 2009. It has OSHA gaurding and safety interlocks on the doors. The filler is a Fimer monoblock with a 9 valve filler and single head ROPP capper. Model 9/1 VA. The machine was manufactured in 2004. The labeler is a New Tec, dual head,rotary, pressure sensitive machine. Model # is Leopard Adhesive 720 F6 S2 E2 + CMP. It is rated at 60 BPM and is capable of applying a front, front/back, or three sided wrap to a square bottle as well as a front/back or wrap to a cylinder bottle. The machine was manufactured in 2009 and is equipped with OSHA guarding package and safety interlocks on the doors. All of the interconnecting conveyors are included with the line which discharges onto a 36 inch accumulation disk. The Hitachi, ink jet printer, model PXR-D460W is also included with the line. The line was set up for 230 volt/3 phase/60 Hz operation. The line was previously running olive oil and there are both cylinder and square bottle, 750 ml change parts Price for Line: $97,500.00 Sean Ager Ager Tank and Equipment 503-222-7079 sean@agertank.com
-
Can somebody educate me on the differences between "Inline Filling Systems, LLC" and "In-Line Packaging Systems, Inc." Inline Filling Systems, LLC is out of Venice, Florida. We are looking at their four head benchtop semiauto overflow filling machine priced around +_12,000.00 uses a slide tray so is hands on but is pneumatic so no electrical hookup, pumps product out of drum. a capper can be added and a labeler. production around 10-12 bottles per-minute. talked to a fellow craft distiller who was satisfied with this filler. if you want more automation requires totally new machine. In-Line Packaging Systems, Inc. is out of North Charleston, SC. We are looking at their 4 head economy filler priced around +_16,000.00. more automated only need to load bottles on conveyor. capper cost at least 4x as much + accessories total around $36,000.00 but fully automated. can added labeler and feed tables enables you to feed new bottles in and box on the other end. anybody have experience with these companies?
-
Can somebody educate me on the differences between "Inline Filling Systems, LLC" and "In-Line Packaging Systems, Inc." Inline Filling Systems, LLC is out of Venice, Florida. We are looking at their four head benchtop semiauto overflow filling machine priced around +_12,000.00 uses a slide tray so is hands on but is pneumatic so no electrical hookup, pumps product out of drum. a capper can be added and a labeler. production around 10-12 bottles per-minute. talked to a fellow craft distiller who was satisfied with this filler. if you want more automation requires totally new machine. In-Line Packaging Systems, Inc. is out of North Charleston, SC. We are looking at their 4 head economy filler priced around +_16,000.00. more automated only need to load bottles on conveyor. capper cost at least 4x as much + accessories total around $36,000.00 but fully automated. can added labeler and feed tables enables you to feed new bottles in and box on the other end. anybody have experience with these companies?