Search the Community
Showing results for tags 'custom-made'.
Found 1 result
-
New, custom-made 375 gallon distillery for sale! Asking $75K $40K OR BEST OFFER. Email John at jw96104@gmail.com for further information. These captions go with the attached photos: 1-distillation-column.jpg Complete distillation column assembled on top of the kettle. Column contains eight bubble plates, four of which are removable. Total height is approximately 14 feet tall. Copper and Stainless Steel construction. 2-boiling-kettle.jpg Boiling Kettle: 375 gallon capacity 304 stainless construction with steel water jacket 1 ½ water jacket In/Out ports Polished interior, sanitary fittings, probe and view ports Bottom of kettle has a 2 inch sanitary fitting for easy drainage and cleaning. 3-condenser.jpg Condenser: Copper coil submerged in a water bath. Cooling water enters on one side of the bath and leaves on the other. Distillate can be collected from the spout on the bottom of the condenser. The condenser bolts directly to the cap of the distillation column. 4-reflux-column.jpg Reflux Column: 8 inch diameter 8 total bubble plates 304 stainless construction with copper caps, tubes and downcomers Constructed with 12 inch flanges and channels for PTFE cord Split into four sections The four interior plates are removable and can but added or removed to adjust the reflux ratio. The holes in the center of the plates have been sealed. Detailed description: This is the total parts list: Custom Boiling Kettle (Serial# K-0924) - 375 gallon capacity - 304 stainless construction with steel water jacket - 1 ½ water jacket In/Out ports - Polished interior, sanitary fittings, probe and view ports Custom Reflux Column - 8 inch diameter - 8 total bubble plates - 304 stainless construction with copper caps, tubes and downcomers - Constructed with 12 inch flanges and channels for PTFE cord - Split into four sections Custom Reflux Column Cap - 8 inch inlet flange mates to top of reflux column - 5 inch outlet flange mates to condenser opening - 304 stainless construction - Probe ports Custom Condenser - Copper and 304 stainless condensing coil - In/Out ports for water circulation - 304 stainless construction - 40 gallon cooling body volume Fermentation/Storage Tank - 275 gallon capacity - Food safe construction - Plastic tank body with steel cage for support - 10 inch port on top with cap - 2 inch outlet valve on bottom with plastic valve Sani-Tech 2 foot Teflon lined transfer hoses (2) - 1½ inch sanitary fittings - USDA and 3A certified Two-inch brass ball valves (3) 10 feet of 1½ inch kettle connection hose (2) - Designed to withstand continuous temperatures of kettle operation - Wire core to withstand high pressure 1½ inch 90° sanitary elbow - 304 stainless construction Tri-Clover 1½ inch sanitary clamp (1) - 304 stainless construction Tri-Clover 2-inch sanitary clamps (4) - 304 stainless construction Tri-Clover 4-inch sanitary clamps (2) - 304 stainless construction 1-4 inch sanitary caps with PTFE gaskets (2, various brands) Connection hardware (6, various brands) - Washers, bolts and lock nuts to connect condenser, reflux column pieces, and kettle together The other parts and pieces are mainly to connect everything together. Aside from capping a few of the probe ports before operation, the only piece missing is a cap for the kettle. Thanks!
