Search the Community
Showing results for tags 'labeling machine'.
Found 5 results
-
SEMIAUTOMATIC LABELING MACHINE FOR ROUND AND SQUARE BOTTLES Semiautomatic single reel bench top labelling machine for round bottles, and square bottles (as marasca for example) with the installation of the related accessory. Application of front and back label on round bottles from the same reel on a single cycle. Application of front and back label on square bottles on two cycles by turning the bottle of 180°. Also recommended for containers having a low mechanical resistance to pressure (i.e. plastic as PET, PE, PVC and so on). Datalogic fork photocell with a 50 mm slot and teach in button. Leuze ultrasonic fork photocell available for transparent labels. 170 mm paper passage (standard). The great advantage of this machine is the capability of labelling round and square bottles (with the related accessory) without the need of mounting / dismounting mechanical parts. It is sufficient to follow the correct paper path according to the required application and make some simple adjustment in compliance to the bottle format and the label(s) size. Productivity: about 600 bph (round bottles – front and back). About 350 bph (square bottles front and back label). Price: $3,782 Optional: Kit for square bottles labeling Price $1,562
-
Looking for a semi automatic neck labeling solution to place a wrap around label on the neck of the bottle? Any suggestions or ideas would be greatly appreciated.
-
OFFER : 11260-19 AUTOMATIC LABELLER FOR AUTOADHESIVE LABELS Machine suitable for application of self-adhesive labelers on cylindrical bottles. The standard version is equipped with step motors and electronic speed driver. The machine is equipped with an electromechanical emergency stop device (product stop), activated in case of failure in the automatic packaging cycle and that can be used in manual mode for maintenance operations. Speed: MAX 1.000 BpH MACHINE SUPPLIED COMPLETE WITH : - Complete safety covers with a plexiglass panel - Infeed screw for bottle separation at the inlet - In-line machine with N.1 labeling unit - Labeling unit motion by stepping motors - Labelling unit supplied with a loading plate for a roll Ø.250mm max. - Labeling unit adjustable in height, for the easiest adjustment to the different types of labels and bottles - Start signal for label release by a precision sensor - Speed of labeling unit synchronized with the speed of the machine - Machine base-frame completely covered with stainless steel plate - Aluminum parts covered with anti-rust painting The base machine is complete with: - N.1 station for application of front label (or front + back label from the same reel) on cylindrical glass bottle - Special wiping rollers with reduced height - Orienting device for the notch on bottle bottom PRICE OF THE BASE MACHINE (ONE LABELLING STATION) $7,956.00.- HOT-FOIL PRINTER: $3,393.00.- PACKING: $819.00.-
-
Hey guys, hoping someone can help me out here. We have been experiencing lots of "Gremlins" or 'Electrical demons" unexplained equipment malfunctions, ect. I think I have determined that we are suffering from Line Side Harmonic Distortion within our electrical system. Has anyone ever experienced this? What steps did you take to correct it?
-
Does anyone have a label applicator that works well with square bottles? I have only dealt with round bottles in the past and can't find any convincing sources for one. Thanks!
