Search the Community
Showing results for tags 'sediment'.
Found 2 results
Hey guys, We picked up the old water filtration system from Bell's brewery here in Kalamazoo, MI. We intended to retrofit it and use it for our process water... But sadly have run out of time and decided to just purchase a new unit. Here's the info on the system. If you're interested or have questions feel free to email me at email@example.com. Asking $500 obo. Buyer must pick up. We can help you load it, 2 guys can carry the whole rack. Come get a piece of brewing history... Would love to give it a new home. Email for pictures. Water filtration system Overall dimensions 103.5"high x 44"wide 19"deep from back of filter to front of front filter Upper pipe diameters 2"id Lower left pipe diameter 1" slightly oval ed so could be 1 1/8" cut copper pipe Lower right pipe diameter male threads 1.5"id 1.75"od 1 5/8" square tubing frame Filters are 20"long and the canisters measure approximately 5.5" in diameter so I assume the filters are 4.5".
Hey Guys...Starting to look into our water treatment systems and have put together the systems below. Based on the water criteria we have here...attached...what is everyone's thoughts on this system? Water Info: City water that originates from 4 wells within the county. Considered "Hard" water. Main water inlet to building is 3/4" There are 2 main systems. The first system will be our process water with the 2nd system being our finishing water. Process water system-Flow: Sediment Filter-Softener Finishing Water System Flow: Sediment Filter-Softener--Additional carbon filtration-RO System Initial Sediment filter http://www.uswatersystems.com/us-water-big-blue-4-5-x-20-commercial-triple-filtration-system.html?fee=10&fep=5067&gclid=CPrP36PdpckCFdCPHwodsFQFyg Filters for sediment filter 20 micron, 5 micron, & Carbon Block for removing dirt, sediment, and chlorine Softener http://www.lowes.com/pd_416874-43353-WHES33_1z10xx4__?productId=3824563&Ns=p_product_qty_sales_dollar|1&pl=1 Additional carbon filtration http://www.amazon.com/Hydro-Logic-31027-Pre-Evolution-Pre-Filter-Evolution/dp/B004LO0HBS/ref=pd_bxgy_60_img_2?ie=UTF8&refRID=1X6QQPSMBKB5NP3H9MTJ RO System http://www.amazon.com/Hydro-Logic-31023-1000-GPD-Evolution-RO1000/dp/B004LNUNKE Some major questions are: 1). if the additional carbon filtration prior to the RO system is necessary sense the water first passes through the carbon block within the sediment filter then the softener prior to even entering the RO system. 2). Should the softener be upgraded to output greater than 15gpm. Thanks for the advice guys...welcome any input or opinions. Best.