300 gallon still $26,995.00 New, in Stock

[Southernhighlander]

We have 2 of these in stock and ready to ship.  We have these units in distilleries all over the US.  With the appropriately sized low pressure steam boiler you can do a whiskey run in 4 hrs from start to finish.   If you have questions email paul@distillery-equipment.com or call 417-778-6100.  If you would like to talk to someone who has ran one of these at their distillery for 3.5 years call Rusty at 757-593-1055.  Check out our web site http://distillery-equipment.com  

 

    The picture above is of one of our 300 gallon Jacketed, Steam Heated, Pro Series Whiskey Stills.  This Still comes standard with our 12" 4 plate Bubble Plate Column $26,995.00 new and in stock.  This column will produce up to 160 proof in 1 run.  The Dephlegmator (Pre-Condenser) can be turned off and the Plate Drain Valves of the Whiskey Column can be opened so that the still can be ran in Pot Still Mode.  Any individual Plate Drain Valves or any combination of the Plate Drain Valves can be ran closed or open to obtain different proofs and flavor profiles.  If you want you can do stripping runs in Pot Still Mode and then do Spirit Runs with the plates closed and the Drain Valves off.  This 300 Gallon Whiskey Still must be heated by a Low Pressure Steam Boiler.   This 300 gallon Still comes standard with:

 

• 300 Gallon Operating Capacity 304SS Stainless Steel Boiler

• 350 Gallon Actual Capacity

• 3hp 230vac 3 phase 0 rpm to 45 rpm Variable Speed Agitator:

• 18" Clamp Down Manway

• 4" Sight Glass in the Manway

• 5 PSI Pressure Relief Valve on the Inner Boiler

• 5 PSI Vacuum Relief Valve on the Inner Boiler

• 15 PSI ASME Pressure Relief Valve On the Jacket

• 15 PSI Steam Jacket

• Insulation Jacket

• 4" Tri Clamp Butterfly Valve on the drain

• 12" Diameter Whiskey Column with 4 Bubble Plates

• 12" Diameter Tube & Shell Dephlegmator

• (4) 4" Sight Glasses in the Column

• 4 CIP Spray Balls in the Column (1 above each plate)

• 4 Plate Drain Valves

• 4" Face Thermometer above the Dephlegmator in the Whiskey Column

• 4" Face Thermometer below the Dephlegmator in the Whiskey Column

• 2 CIP Spray Balls in the Boiler

• 4" Face 0°F to 250°F Thermometer in the Column

• 3" Face 0°F to 250°F Thermometer on the inner Boiler

• 12"x36" Tube and Shell Condenser

• Stainless Parrot's Beak

• Bolt to the Floor Stainless Table Stand or Stainless Column Stand for the Condenser, You Pick.

• 11'7" Overall Height

• Mirror Polish on Copper and Stainless

• Inner Boiler has a Mirror Polish