Jump to content

Forklift size?


Shindig

Recommended Posts

we bought a lil propane powered toyota with solid tires. I like the side shift feature for making sure that you are on the money when loading in materials and it's a tight spot. I think the key to buying a lift, especially if this is your first one, buy one from someone who will give you support when it goes down. Because if and when it goes down, you'll want it up and running asap. You never find out when things are broken days before you need them.

Link to comment
Share on other sites

Great info guys! Thanks. I was spoiled and used a brad new electric side shift 8,000 pound one during training but knew I could never afford it for our start-up. I was curious about what we could get by with and the cost. I am hoping we can get one for around $5k.

Link to comment
Share on other sites

i use a 5000lb forklift that I borrow from our friendly neighbors, for offloading trucks and moving totes. But I want a very small 1-2000lb forklift that can navigate my tight barrel rooms. maybe even a walk behind. seems like anything less than $10k is gonna be well used. even the used forklift dealers I've talked to don't deal with lifts less than $10k.

Link to comment
Share on other sites

I'd suggest craigslist and local online equipment auctions, there's some serious deals to be had if you are patient.

Every time I check e-bay it seems I can find something for 1/2 the price (or less) elsewhere; typically local where I can go and visually inspect it.

Skål!
Link to comment
Share on other sites

I can tell you my experience with our "forklift" has been horrible. We got a walk behind Crown electric forklift. Its powerless, it can't go for more than one day unloading without dying. It gets caught on every uneven surface outside, God forbid the sidewalk is uneven when carrying a load. Plus we have no garage door, so every time I use it inside I need to disassemble it, and set the forks in narrow so it will fit through the door. Then reset the forks once I am inside, then repeat when I move it back outside. I swear I am going to drive that thing off of the highest mountain I can find....

That last one is a joke... it wouldn't make it down the street....

Jake

Link to comment
Share on other sites

We had an issue with the Fire Marshall only allowing electric. He didn't want the propane in the building where we already had a flammable. You might want to check with your local officials before buying something. I'm just say'in.

Link to comment
Share on other sites

We bought at Catapillar 4,000lb electric with side shift for $6K with the charger and delivery the only problem with it is its a quad mast that can lift to 258" so its really hard to see through it to what you're picking up.

Link to comment
Share on other sites

I have two (not on purpose, just worked out like that), a 2000 electric crown 'shelf picker' rated at 3500lbs for $3200 (including the charger) on craigs. Its great but you need a very flat and level floor and I can't go in my parking lot as the small roller wheels get hung up. Since I have to unload/load in my parking lot I picked up a 1978 propane hyster rated at 3200lbs off of craigs for $1300. The Crown is great in the shop as its very maneuverable. The older a lift is the harder it is to get parts. I had to rebuild a tilt cylinder in the Hyster and getting the correct seal kit was tough.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...