Jump to content

Uks Inc

Vendor
  • Content Count

    62
  • Joined

  • Last visited

Community Reputation

0 Neutral

1 Follower

About Uks Inc

  • Rank
    Active Contributor

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

2,063 profile views
  1. MONOBLOC FILLER / CAPPER FOR “MIGNON” BOTTLES 6000 BpH OFFER : 9658-17 Price: $142,500.00 TYPE OF MONOBLOC: FILLING – ROPP CAPPER MODEL: COMPACT C24VA4 VARIABLE SPEED DEVICE: ELECTRONICALLY WITH “INVERTER” FREQUENCY CONTROLLER TYPE OF FILLER: RM line LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY GRAVITY NR OF FILING VALVES: 24 VALVE DIAMETER: 8 mm LIQUIDS THAT CAN BE USED: SPIRITS TYPE OF BOTTLES: CYLINDRICAL GLASS 50 ml DIAMETER OF THE BOTTLES: MIN 32 mm / MAX 59 mm BOTTLES CONVEYING SYSTEM: BY MEANS OF A SCREW MODEL: EURO/VA 4 HEADS THROUGHPUT BT/H: 6000 BpH on 50 ml format TECHNOLOGIES TURRET: EURO/VA 4 HEADS AROL BRAND NUMBER OF CAPPING HEADS: 4 TYPE OF CAP: ALUMINIUM CAP FEED: CENTRIFUGAL SYSTEM BOTTLE CONVEYING SYSTEM: BY MEANS OF SCREWS MAIN TECHNICAL AND CONSTRUCTIVE FEATURES - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in touch with the liquid of stainless steel AISI 304 - Power transmission through gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. FILLING TURRET 24-VALVE GRAVITY FILLER RM line - Parts in touch with the liquid in stainless steel AISI 304 - Type of cylinder: Pneumatic, air recycling, 310 mm stroke, ø 34 mm. The machines do not foresee any height adjustment of the tank at the format change Tank height adjustment device when carrying out the format change - Power transmission through gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling by gravity system 2. CAPPING TURRET 4-HEADS AROL FOR ROPP ALUMINIUM CAPS - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Power transmission through gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box - Completely manufactured in stainless steel - N.3 closing heads - Vibrating capsule feeder - Pick-off caps distribution system - Device for the height adjustment while carrying out the format change
  2. MONOBLOCK FILLER/CORKER FOR SPIRITS - 2000 BpH (SQUARE AND CYLINDRICAL BOTTLES) Offer: 10739-19 IMPORTANT NOTE: THIS MONOBLOCK CAN WORK BOTH SQUARE AND CYLINDRICAL BOTTLES TYPE OF MONOBLOCK: FILLING 16 VALVES - CAPPING 1-HEAD MODEL: 16-1 PP VARIABLE SPEED DEVICE: ELECTRONIC VARIATOR LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY LOW VACUUM N° OF FILLING VALVES: 16 LIQUID THAT CAN BE USED: NON DENSE SPIRITS MAX PRODUCTION IN BPH: MAX 2.000 x 1 lt CAPPER FOR PLASTIC CAP: ALEXA PP NUMBER OF CAPPING HEADS 1 TYPE OF CAP: BARTOP CORK CLOSING HEAD: WITH VACUUM OR GRIPPER CAP FEED: BY MEANS OF A VIBRATING SYSTEM CAP SIZE: TO BE CHECKED DIAMETER OF THE BOTTLES: MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES: MIN/MAX 180/350 mm PRICE EX-WORKS: $78.597.00 OPTIONS CHANGE PARTS FOR DIFFERENT BOTTLES SIZES (CYLINDRICAL): $2,153.00 CHANGE PARTS FOR DIFFERENT BOTTLES SIZES (SQUARE): $2,829.00 ACCESSORIES FOR ANOTHER FORMAT OF BARTOP CORK – TO BE CHECKED AFTER SAMPLES CHECKING: $7,011.00 SYSTEM FOR FILLER CLEANING WITH DUMMY BOTTLES AND SPRAYBALLS IN THE BOWL: $8,363.00 PACKING: $1,476.00 MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - The electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 16-VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with a cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with a pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - The outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with a rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - The electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with LOW VACUUM system 2. SINGLE HEAD CAPPER FOR BARTOP CORK - Vibrating hopper for cap selection - Cap chute with detection photocell - Pick&Place system for picking up the cork from the cap chute and positioning it under the closing head - Closing head with a vacuum system for keeping the cork - Manual lifting for a format change
  3. DESCENDING HEAD CAPPING MACHINE FOR ROPP CLOSURES Descending head semiautomatic capping machine for PFP caps with or without plastic pourer. The bottle, with the cap placed manually on the neck, is placed on the support plate. By pressing the 2 buttons at both sides of the base, the closing head descends, threading and sealing the capsule in a few seconds. The machine is suitable for closing PFP caps from a minimum of Ø 18 mm to a maximum of 38 mm. The 4 rollers NO CAP NO ROLL closing head is completely manufactured in s/steel and it’s adjusted for closing 1 cap size. For each different diameter, it is necessary to purchase a supplementary closing head. The machine can be provided with a 220 V single phase or a 208 V three phase voltage. The productivity, depending on the operator can reach 500 / 600 bph. Price: 110V 60hz single phase - $5,475.00 Production: about 500/600 bott/h Dimensions: mm 450 x 450 x 1100 Weight: kg. 50,00 Power: 0,25 KW 0,37 KW Electrical supply: Single phase 110V or three phase 208V CAP FORMAT CHANGEOVER 4 rollers ROPP closing head with no cap no roll system (for 1 cap format) Price: $2,120.00
  4. That filler making up to 500 BpH. Picture attached. Regards, Al 2092ADS-Semiautomatic bench line for spirits 11-10-2016.bmp
  5. SEMIAUTOMATIC 4 NOZZLES VACUUM FILLER - 2,904.00 PROFESSIONAL. Filler operates through a vacuum pump. For its size and stainless steel construction frame, it is the ideal equipment for edible oil producers, farms, wine-growers, distilleries, etc. The possibility of using different filling nozzles (manufactured both with s/steel or plastic materials) allows to fill practically every kind of glass bottles in commerce (with liquid or semi liquid products). RELIABLE. Through a vacuum filling system, the product is bottled in the most natural way, allowing to maintain its original quality and features. When placing the bottle under the machine, the fluid is sucked by the vacuum created inside it, without any contact between product and pump or mechanical components. FAST AND PRACTICAL. Filler fills about 500 bottles an hour, in perfect hygienic conditions and with no product spillage. The filling level is adjustable: once selected, it automatically fills up the bottle to the desired level. Also, the tank from which the fluid is taken for bottling can be placed even 4 meters below filler. Once the required filling level has been achieved, the liquid in excess is conveyed to the recovery vessel. SIMPLE to use and clean. Several accessories are available for filling mignon or out-of-standard bottles. Should the filling machine be employed for filling products containing more than 20% alcohol, the pyrex recovery vessel is recommended (as well as the pyrex filter-holder for the Tandem Professional). Description: Vacuum filler 110V 60Hz single phase - 4 stainless steel nozzles with PYREX recovery vessel and pharma-press hoses. Technical features size mm 650 x 460 x 450 weight kg 25 power 120 WATT electrical supply 110 V - 60 Hz Bottles features Height: Maximum 360 mm Neck internal ø: From 7,5 to 16 mm (miniature nozzles) From 16 to 28 (standard nozzles) Bottle maximum ø 155 mm Price: 2,904.00
  6. Picture attached. Contact us then you are ready to order rinser. Brand name: Canellitech, Italy Regards, Al 9121-17.bmp
  7. High quality equipment, budget prices. MANUAL BOTTLE RINSER OFFER : 9121-17 The manual rinser/blower with N.4 nozzles is built entirely in steel AISI 304 and it’s suitable to rinse the new bottles and jars inside by pre-filtered air or water before the filling operation. Way of functioning Container has to be positioned into the spray nozzle by hand and then push the bottle in the nozzle; after rinsing there is the dropping time to reduce the residual water inside the bottle. The machine is equipped with water filter or air filter. Production: 300/400 b/h Dimensions: 500mm X 500mm X H 700 - Weight: Kg. 20 PRICES: - SIMPLE WATER VERSION $1,386.00.- - RECIRCULATION VERSION WITH PUMP $2,142.00.- Optional explosion proof PUMP $1,978.00.- Also available: Complete Bottling lines for sparkling wine, still wine, beer, cider, and soft drinks with various speed production up to 12000 bph.
  8. PNEUMATIC CAPPER for corks/crowns/snap on caps Price $1,426.00 TECHNICAL FEATURES Production: 400 bph (natural or silicone corks) Up 600 bph (crown or snap on caps) Size: mm 375 x 325 x 745 Weight: kg. 25 Supply: air compressed (4 ÷ 6 bar) Bottle and cap features: NATURAL OR SILICONE CORKS: Max ø 25mm – Max height 45mm Bottle height from 200 to 370mm SNAP ON CAPS: closing head ø 37mm Bottle height from 130 to 465mm CROWNS ø 26 and 29mm (optional 30,5mm) Bottle height from 130 to 465mm Also available: Complete Bottling lines for spirit, wine, beer, and cider with various speed production. Please visit our web site for more information. www.uksinc.com
  9. MONOBLOCK FILLER/CAPPER FOR 3 Lt BOTTLES OFFER : 10339-18 PRICE EX-WORKS 900 BpH: $73,970.00 300 BpH: $64,020.00 MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 10-VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with GRAVITY system 2. SINGLE HEAD CAPPER FOR ALUMINIUM SCREW CAPS - Vibrating hopper for cap selection - Cap chute with detection photocell - Distribution head - Threading head with 4 rollers and “no cap / no roll” system - Manual lifting for format change AUTOMATIC LABELLER FOR AUTOADHESIVE LABELS – FOR BIG BOTTLES Machine suitable for application of self-adhesive labellers on glass bottles. The standard version is equipped with step motors and electronic speed driver. The machine is equipped with electromechanical emergency stop device (product stop), activated in case of failure in the automatic packaging cycle and that can be used in manual mode for maintenance operations. Speed: MAX 1000 bph MACHINE SUPPLIED COMPLETE WITH : - Complete safety covers with plexiglass panel - Infeed screw for bottle separation at the inlet - In-line machine with N.1 labelling unit - Labelling unit motion by stepping motors - Labelling unit supplied with a loading plate for a roll Ø.240 mm max. - Labelling unit adjustable in height, for the easiest adjustment to the different types of labels and bottles - Start signal for label release by precision sensor - Speed of labelling unit synchronized with the speed of the machine - Machine base-frame completely covered with stainless steel plate - Aluminium parts covered with anti-rust painting The base machine is complete with: - N.1 station for application of front label on CYLINDRICAL glass bottle - Bottle collecting table (50x100 cm)
  10. DESCENDING HEAD CAPPING MACHINE FOR ROPP CLOSURES Descending head semiautomatic capping machine for PFP caps with or without plastic pourer. The bottle, with the cap placed manually on the neck, is placed on the support plate. By pressing the 2 buttons at both sides of the base, the closing head descends, threading and sealing the capsule in a few seconds. The machine is suitable for closing PFP caps from a minimum of Ø 18 mm to a maximum of 38 mm. The 4 rollers NO CAP NO ROLL closing head is completely manufactured in s/steel and it’s adjusted for closing 1 cap size. For each different diameter, it is necessary to purchase a supplementary closing head. The machine can be provided with a 220 V single phase or a 208 V three phase voltage. The productivity, depending on the operator can reach 500 / 600 bph. 110V 60hz single phase - $5,460.00 Production: about 500/600 bott/h Dimensions: mm 450 x 450 x 1100 Weight: kg. 50,00 Power: 0,25 KW 0,37 KW Electrical supply: Single phase 110V or three phase 208V CAP FORMAT CHANGEOVER 4 rollers ROPP closing head with no cap no roll system (for 1 cap format) - $2,080.00
  11. MONOBLOCK FILLER/T-CORK – 700 BpH OFFER : 10275-18 BOTTLING LINE FOR NON-DENSE SPIRITS Price ex-Work: $41,600.00 CHANGE PARTS FOR DIFFERENT BOTTLES SIZES: $1,408.00 Each ACCESSORIES FOR ANOTHER FORMAT OF T-CORK (VIBRATING HOPPER, CAP CHUTE AND PICK&PLACE ACCESSORIES) – TO BE CHECKED AFTER SAMPLES RECEIPT: $6,592.00 Each Packing: $1,152.00 TYPE OF MONOBLOCK: FILLING 6 VALVES - CAPPING 1-HEAD MODEL: 6-1 PP VARIABLE SPEED DEVICE MECANIC: VARIATOR LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY LOW VACUUM N° OF FILLING VALVES: 6 LIQUID THAT CAN BE USED: SPIRITS MAX PRODUCTION IN BPH: MAX 700 x 0.75 lt CAPPER FOR PLASTIC CAP: ALEXA PP NUMBER OF CAPPING HEADS: 1 TYPE OF CAP: T-CORK CLOSING HEAD: WITH VACUUM CAP FEED: BY MEANS OF A VIBRATING SYSTEM CAP SIZE: TO BE CHECKED DIAMETER OF THE BOTTLES: MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES: MIN/MAX 180/350 mm IMPORTANT NOTE: THIS MONOBLOCK CAN WORK ONLY WITH CYLINDRICAL BOTTLES MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 6 -VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with LOW VACUUM system 2. SINGLE HEAD CAPPER - Vibrating hopper for cap selection - Cap chute with detection photocell - Pick&Place system for picking up the cork from the cap chute and positioning it under the closing head - Closing head with vacuum system for keeping the cork - Manual lifting for format change
  12. MONOBLOC RINSER/FILLER/CAPPER FOR “MIGNON” 50 mL BOTTLES 1000 BpH OFFER : 9736-18 PRICE EX-WORKS: 76,960.00 AS ALTERNATIVE – MONOBLOCK WITHOUT RINSER PRICE EX-WORKS: 47,970.00 TYPE OF MONOBLOC: AIR RINSING – FILLING – ROPP CAPPER MODEL: 9-8-1 AV VARIABLE SPEED DEVICE: ELECTRONICALLY WITH “INVERTER” FREQUENCY CONTROLLER TYPE OF RINSER: MOD. XP9 TYPE OF GRIPPER: BY TWIST NUMBER OF GRIPPERS: 9 RINSING LIQUID: DISPOSABLE MICRO FILTERED WATER TURRET LIFTING: ELECTRICAL TYPE OF FILLER: RM line LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY GRAVITY NR OF FILING VALVES: 8 VALVE DIAMETER: 8 mm LIQUIDS THAT CAN BE USED: SPIRITS TYPE OF BOTTLES: CYLINDRICAL GLASS 50 ml DIAMETER OF THE BOTTLES: MIN 32 mm / MAX 59 mm MODEL: ALEXA HD MAX PRODUCTION IN BPH: 1000 BpH on 50 ml format NUMBER OF CAPPING HEADS: 1 TYPE OF CAP: ROPP ALUMINIUM SCREW CAP CAP FEED: VIBRATOR SYSTEM BOTTLE CONVEYING SYSTEM: BY MEANS OF STARWHEELS
  13. MONOBLOCK FILLER/CAPPER/BARTOP CORK for SPIRITS 1000 ($84,110) and 2000 BpH ($91,650) Offer 10095-18_REVISION A TYPE OF MONOBLOCK : FILLING 8 VALVES - CAPPING 1-HEAD – CORKER 1-HEAD MODEL : COMPACT 8-1-1 AV-PP VARIABLE SPEED DEVICE : MECANIC VARIATOR LIFTING CYLINDERS : PNEUMATIC FILLING SYSTEM : BY HIGH VACUUM SYSTEM N° OF FILLING VALVES : 8 LIQUID THAT CAN BE USED : DENSE SPIRITS MAX PRODUCTION IN BPH : MAX 1000 x 0.75 lt 1ST CAPPER : ALEXA AV NUMBER OF CAPPING HEADS : 1 TYPE OF CAP : ROPP / STELVIN CAP CLOSING HEAD : 4-ROLLERS WITH “NO CAP / NO ROLL” SYSTEM CAP FEED : BY MEANS OF A VIBRATING SYSTEM CAP SIZE : TO BE CHECKED 2ND CAPPER : ALEXA PP NUMBER OF CAPPING HEADS : 1 TYPE OF CAP : BARTOP CORK CLOSING HEAD : WITH PICK AND PLACE DEVICE AND VACUUM SYSTEM CAP FEED : BY MEANS OF A VIBRATING SYSTEM CAP SIZE : TO BE CHECKED DIAMETER OF THE BOTTLES : MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES : MIN/MAX 180/350 mm MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 8 - VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with HIGH VACUUM system with external vacuum pump and tank 2. SINGLE HEAD CAPPER FOR ROPP ALUMINIUM CAPS - Vibrating hopper for cap selection - Cap chute with detection photocell - Distribution head - Threading head with 4 rollers and “no cap / no roll” system - Manual lifting for format change 3. SINGLE HEAD CORKER FOR BARTOP CORKS - Vibrating hopper for cap selection - Cap chute with detection photocell - Pick&Place system for picking up the cork from the cap chute and positioning it under the closing head - Closing head with vacuum system for keeping the cork - Manual lifting for format change AS ALTERNATIVE – MONOBLOCK WITH 12 FILLING VALVES (CAPACITY MAX 2000 BpH)
  14. MONOBLOCK FILLER/CAPPER DENSE SPIRITS 1000 ($57,070) and 2000 ($64,610) BpH OFFER : 10095-18 MONOBLOCK 1000 BpH: TYPE OF MONOBLOCK : FILLING 8 VALVES - CAPPING 1-HEAD MODEL : COMPACT 8-1 AV VARIABLE SPEED DEVICE : MECANIC VARIATOR LIFTING CYLINDERS : PNEUMATIC FILLING SYSTEM BY HIGH VACUUM SYSTEM N° OF FILLING VALVES : 8 LIQUID THAT CAN BE USED : DENSE SPIRITS MAX PRODUCTION IN BPH : MAX 1000 x 0.75 lt CAPPER FOR PLASTIC CAP : ALEXA AV NUMBER OF CAPPING HEADS : 1 TYPE OF CAP : ROPP / STELVIN CAP CLOSING HEAD : 4-ROLLERS WITH “NO CAP / NO ROLL” SYSTEM CAP FEED : BY MEANS OF A VIBRATING SYSTEM CAP SIZE : TO BE CHECKED DIAMETER OF THE BOTTLES : MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES : MIN/MAX 180/350 mm MONOBLOCK 2000 BpH: TYPE OF MONOBLOCK : FILLING 12 VALVES - CAPPING 1-HEAD MODEL : COMPACT 12-1 AV VARIABLE SPEED DEVICE : MECANIC VARIATOR LIFTING CYLINDERS : PNEUMATIC FILLING SYSTEM BY HIGH VACUUM SYSTEM N° OF FILLING VALVES : 12 LIQUID THAT CAN BE USED : DENSE SPIRITS MAX PRODUCTION IN BPH : MAX 2000 x 0.75 lt CAPPER FOR PLASTIC CAP : ALEXA AV NUMBER OF CAPPING HEADS : 1 TYPE OF CAP : ROPP / STELVIN CAP CLOSING HEAD : 4-ROLLERS WITH “NO CAP / NO ROLL” SYSTEM CAP FEED : BY MEANS OF A VIBRATING SYSTEM CAP SIZE : TO BE CHECKED DIAMETER OF THE BOTTLES : MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES : MIN/MAX 180/350 mm MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 8 0r 12 - VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - Outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with HIGH VACUUM system with external vacuum pump and tank 2. SINGLE HEAD CAPPER - Vibrating hopper for cap selection - Cap chute with detection photocell - Distribution head - Threading head with 4 rollers and “no cap / no roll” system - Manual lifting for format change
  15. SEMIAUTOMATIC MONOBLOCK FOR 50 ml BOTTLES OFFER : 9770-18 TYPE OF MONOBLOC: FILLING – CAPPING LIFTING CYLINDER: PNEUMATIC FILLING SYSTEM: BY LOW VACUUM No OF FILLING VALVES: 4 CAPPING HEAD: 1 CAPACITY MAX. IN BpH: 500 TYPE OF CAP: ALUMINIUM SCREW CAPS CLOSING HEAD: 4-ROLLERS THREADING HEAD CAP FEED: MANUAL BOTTLE TYPE: GLASS BOTTLE DIAMETER mm: ACCORDING TO YOUR SAMPLE BOTTLE HEIGHT mm: ACCORDING TO YOUR SAMPLE TECHNICAL FEATURES - Machine base covered entirely in AISI 304 stainless steel. - Safety guards according to CE norms. - Parts in contact with product in AISI304 stainless. - Pneumatic lifting and lowering by means of levers. - Pneumatic valve on the feeding pipe for the control of the product flow. - Probes in the filling bowl for level control. - Connection for feeding pump. - Electrical box with low voltage controls - Filler with N.4 filling valves - Filling by low vacuum - The aluminum cap must be placed by hand on the bottle neck - Threading head with 4 rollers and “no cap / no roll” device - Pneumatic cylinder on capper PRICE EX-WORKS $13,362.00.- PACKING INTO WOODEN CRATE $524.00.-
×
×
  • Create New...