Dehner Distillery

Nothing will have a higher concentration of sugar than granular sugar. The sugar density is far higher than hfcs, or anything else.

You have to mix the spent grain with something like hay. Chickens you can feed straight. My spent grain is dry or a little damp when it leaves. And paper work required.

What parts are needed for an agatior? I just want to know about sealing it so no vapor leak out buy the motor.

It has a 5 hp motor the 7.5 hp will do a little over 8000 lb per hour

I'm starting to build stills and parts for distillerys. One of them being a hammer mill. It will do about 4000-5000 pounds an hour at 1/4" screen.

I'm going to start building hammer mills along with stills! Fyi

I'll build parts for you. And test for leaks!!! A coil or jacket may be bad.

I'm now starting to build distillery parts and stills so if anyone needs anything....

I don't agree. Electric power is in most cases cheaper. And with the element submerged in the liquid the heat transfer rate is far superior to that of steam jackets, And the cost of natural gas or LP. I would say electric is okay up to somewhere around 300 gallons. 100-150 no problem. The electric set up is quick and easy and cheap, whereas installing a steam boiler is very expensive itself just for the unit. Let alone the install.

I'll build you a condenser no one could swamp. It is not just the type but the internal design. I'm not going to tell all my secrets but I could make 4' condenser act as if it is 20' long and you would use dramatic less amount of water. Jolede029@yahoo.com

Made in America!!!!!

Send me a drawing and ill look at building the tank for you! Jolede029@yahoo.com I'm starting to build still and other parts for people.

Jim, and John I just wanted to put my two cents in. Some of you I Probably talked to about this, but I just wanted to say it again. I am currently starting a new manufacturing business making stills and still components made in the United States not China. One of them I'm working on is my continuous still that is currently a prototype right now, But I do use it for my own distillery. It can process 3/8 of a gallon per minute and I'm working on to increase it to 1/2 of a gallon per minute processing. My output is easily 80 to 85%. Although it does not take out forshot, heads, body, and tails, I use it for stripping only. It is the cats pajamas!

If you're looking for a Hammermill let me know I can get you one. Made in the USA.

Are you still looking for Equipment? I can build you about anything you would like. And it's all made in the USA not China.

Are you still looking for a still or any distillation equipment? I can make you anything you want on the new and upcoming still designer. And builder everything is made in the USA not China.

You had better go to the bank and get along for the copper it's going to be crazy expensive. It's cheaper to buy copper by the sheets and slip role of yourself and make your own tubes. If you need help building stills, I can help you I build stills.

Are you still looking for Equipment? I make just about everything.

Are you still looking for a still?

I can't help you out with Sam but I can build anything you want With electric. 515-559-4879

I am also still manufacturer. 100% made in the United States no imported crap from China. 515-559-4879

I am getting into the manufacturing side of the distillation process. I guarantee you high quality and made in America. At a reasonable price. 515-559-4879

I am getting into the equipment manufacturing side of the Distilling Industri and I can provide you with about anything you need. And I guarantee it's 100% made in America. 515-559-4879

That awesome! I love that.

Make your own. I did. I'll make you a still of great quality cheap. 515-559-4879 www.dehnerdistillery.com