Search the Community
Showing results for tags 'flaked'.
Found 1 result
I was wondering if anyone had some experience with distilling and mashing with 100% flaked grains. I'm trying to use a 100% flaked bill for ease of use but keep running into a thick pourage that I can't seem to process. Below is the procedure and ratios I'm using but getting stuck and hoping someone might be able to provide some insight... I'm mashing for Distilling. 30 pounds of grain – 100% flaked wheat .375 gallons water per pound of grain (1.5 qt / pound) Bring water to 142 and pH correct to 5.0 with citric acid Mix in BioGlucanase GP – about 4ml worth Mix in Grain Check temp, should be 135-142 and held in that range Hydrate grain for 35min stir every 5-10 min; stir constant if having to bring temp up at all - done once (used direct steam injection for heating up) Bring temperature up to 150 Stir in Amoly 300 - 22ml Maintain temp at 145-155; stir constant if having to bring temp up at all Stir every 15 min and cook for 90min So in this test run when I was bringing up the temp for the Amoly I was stirring constantly and it really starting taking a turn for thick pourage at this point I'd prefer to stick with a 100% flaked grain bill if possible..