ZimDist Posted May 1, 2019 Share Posted May 1, 2019 Stage 1-Carbon Filtration : Sized at 250 LMH Supradisc Housing : WSFZ162F31UT5J - WSFZ Standard Accessory Kit : GFB0157 Carbon Module : PN 7007965 ; AKS 4 300XAK4C419SP - https://food-beverage.pall.com/en/spirits/activated-carbon-treatment.html Stage 2- Blended Product : Sized at 500 LMH Suprak S Housing : SPSA100TVA – S housing - data sheet attached Modules : PN 5303133/S SUPRAPAK SH 5900 SW ( option will be to move to lower pore size) - https://food-beverage.pall.com/en/spirits/chill-haze-removal-stabilization.html Stage 3-Guard Filtration: Sized at 20 L/min per 10 inch Housing : FBVHP013DN25-DR – data sheet attached Standard Accessory kit : GFB0157 Cartridge : B11825 PREcart PP II 499A150W073SP 5 micron absolute - https://food-beverage.pall.com/en/spirits/activated-carbon-removal.html Link to comment Share on other sites More sharing options...
Naked Spirits Distillery Posted May 1, 2019 Share Posted May 1, 2019 I have a very good friend that is on their management team if you need information. I will be bringing in their equipment in the near term. Link to comment Share on other sites More sharing options...
ZimDist Posted May 2, 2019 Author Share Posted May 2, 2019 2 hours ago, Naked Spirits Distillery said: I have a very good friend that is on their management team if you need information. I will be bringing in their equipment in the near term. Thank you They have been very helpful. I will be purchasing the above Link to comment Share on other sites More sharing options...
Jwalsh77 Posted May 2, 2019 Share Posted May 2, 2019 I was just looking into filtration for our start up. Glad to see this post. Link to comment Share on other sites More sharing options...
ZimDist Posted May 6, 2019 Author Share Posted May 6, 2019 is this an over kill as a start up? Also what is meant by polishing? Link to comment Share on other sites More sharing options...
ZimDist Posted May 6, 2019 Author Share Posted May 6, 2019 On 5/2/2019 at 1:42 AM, Naked Spirits Distillery said: I have a very good friend that is on their management team if you need information. I will be bringing in their equipment in the near term. I wanted to know if this proposed set up would make the product very smooth? Link to comment Share on other sites More sharing options...
Dehner Distillery Posted May 13, 2019 Share Posted May 13, 2019 I do. Sorta. I mod-ed some of there equipment. Works great. All different filter sizes. Link to comment Share on other sites More sharing options...
Triangle Distiller Posted May 29, 2019 Share Posted May 29, 2019 I"d like to take a look at this equipment. Who is the contact for supply? Link to comment Share on other sites More sharing options...
ZimDist Posted June 2, 2019 Author Share Posted June 2, 2019 On 5/29/2019 at 2:08 AM, Distiller101 said: I"d like to take a look at this equipment. Who is the contact for supply? google www.pall.com to find the distributor in your country Link to comment Share on other sites More sharing options...
ZimDist Posted June 2, 2019 Author Share Posted June 2, 2019 On 5/13/2019 at 8:42 PM, Dehner Distillery said: I do. Sorta. I mod-ed some of there equipment. Works great. All different filter sizes. I am excited to use their equipment Link to comment Share on other sites More sharing options...
FijiSpirits Posted June 4, 2019 Share Posted June 4, 2019 Wouldn’t it just be easier to use granulated charcoal and prewash it before putting it in a simple 4” x 72” column? have you read gert strands activated charcoal book? It’s like free online and super helpful. Not trying to be be a jerk but rinsing carbon like 7 times and agitating by hand then soaking for 24 hours in a bucket is super easy and part of commissioning the stuff anyway. I get no particulates with just a hold up screen and a piece of filter cloth tied to the spout. ALL LOOSE CARBON HAS TO BE WASHED. Even the “prewashed” stuff. It makes more powder in the bag just from handling. I seem to get the the best results from the coconut shell 12-40 mesh stuff. The anthracite coal based carbon throws a weird flavor for me. Seriously. Search the book and read it. It’s short. It’ll save you a ton of money. Link to comment Share on other sites More sharing options...
ZimDist Posted June 5, 2019 Author Share Posted June 5, 2019 22 hours ago, FijiSpirits said: Wouldn’t it just be easier to use granulated charcoal and prewash it before putting it in a simple 4” x 72” column? have you read gert strands activated charcoal book? It’s like free online and super helpful. Not trying to be be a jerk but rinsing carbon like 7 times and agitating by hand then soaking for 24 hours in a bucket is super easy and part of commissioning the stuff anyway. I get no particulates with just a hold up screen and a piece of filter cloth tied to the spout. ALL LOOSE CARBON HAS TO BE WASHED. Even the “prewashed” stuff. It makes more powder in the bag just from handling. I seem to get the the best results from the coconut shell 12-40 mesh stuff. The anthracite coal based carbon throws a weird flavor for me. Seriously. Search the book and read it. It’s short. It’ll save you a ton of money. thank you. I have ordered the carbon, my tilter clums hold 40kgs each. I will re wash them and also soak them Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now