Jump to content
ADI Forums

Recommended Posts

SOLD

We are currently in the process of switching our distillation equipment to focus more on our farm and micro-malting facility instead of contract distilling. This equipment would be an incredible package for contract distilling, a distillery looking to expand, or a winery/distillery. Individual equipment prices are listed below. The entire package is listed at. We will consider any and all offers. Please feel free to PM, reply, or email adam.stumpf (at) stumpysspirits.com with any questions or for pics.

- Continuous Column Still - 40 plate continuous column still that includes boiler with steam heat exchanger, wash pre-heater, 2 columns, condenser, and piping. The still is broken up into 2 15' columns that are 12" in diameter to save on ceiling height. Still has ability to fractionate. Still is currently being used to strip low wines. Stripping 8% wash at 25+ gallons per hour of distillate at ~110 proof. Still was previously used to run apple brand and produced 15 gallons per hour of 160 proof hearts. Pressure relief valve, pressure gauge, and thermos included.

- 650 Gallon Pot Still w/ 5 Plate Column - Heated via steam coil. Pneumatic agitator. 4" bottom drain and 2" side drain. Copper dephlegmator at top of column. All stainless construction. Column has structured copper mesh. Also have copper sheet to place behind steam coils for spirit runs. Will include ~75 lb of copper sheet with the still. Comes with 3 condensers. Currently running small 316 stainless condenser that does just fine. Also have 2 larger 304 condensers. Capable of hitting vodka proof in 3 runs.Still outfitted with pressure relief valve, pressure gauge, and thermos.

- 1,000 Gallon Mash Tun - 1,000 Gallon Pfaudler tank with 2hp 220 3 phase agitator. 6" drain reduced to 4" reduced to 1.5". Steam jacket. Cooling jacket. Hinged lid. Ladder. CIP ball. As bottom supports for false bottom (false bottom not included). On mild steel stand.

- 950 Gallon Variable Capacity Fermenter - Spokane Industries tank. Variable capacity lid w/ good gasket. Air lock, 2" bottom drain, 2" fill port, thermowell w/ thermometer, aeration port, sample port, sloped bottom, dimpled cooling jacket. Stainless construction and sits on mild steel stand.

- 800 Gallon Fermenter - Stainless construction with stainless legs. Hinged lid, CIP ball, dished bottom, 1.5" drain, side mounted prop agitator (no motor included), single wall.

- Mash Cooling System - Kiesel SP 12 Eccentric Screw Pump, 16' 4" high temp hose, 2 8' sections 4" high temp hose, 2 5' 4" shell in tube heat exchangers

- 1,500 Gallon Pasco Poly Tanks - I have 2 of these. Have top and bottom stainless manways as well as 3" and 1.5" tri clamp ports.

 

- GAI 500 Rotary Filler - SOLD

- OMB ET 1500 Pressure Sensitive Labeler - SOLD

  • reaction_title_1 1

Share this post


Link to post
Share on other sites

I have a large package chiller to be remanufactured, less than a year old, which is a multiple compressor scroll, 100 ton.

Customer price will look like a 50 ton unit.

It will be remanufactured with a different evaporator section and all new controls (PLC).

If we know ahead of time, we can customize circuits and add pump.

This figures to be gone next month, this would come close with a little room for all the cooling.

Stumpy- you didn't say if the chiller system is included?

Mike G 770-995-4066

Share this post


Link to post
Share on other sites

I have a large package chiller to be remanufactured, less than a year old, which is a multiple compressor scroll, 100 ton.

Customer price will look like a 50 ton unit.

It will be remanufactured with a different evaporator section and all new controls (PLC).

If we know ahead of time, we can customize circuits and add pump.

This figures to be gone next month, this would come close with a little room for all the cooling.

Stumpy- you didn't say if the chiller system is included?

Mike G 770-995-4066

No chiller included. We use well water to cool everything.

Share this post


Link to post
Share on other sites

If you can estimate the Gal/day you used, I could check the system needed to chill with a closed loop.

Mike

Share this post


Link to post
Share on other sites

I would be interested in pics of this equipment if still available.

Hey wolfgrad. Just shot you a PM.

Share this post


Link to post
Share on other sites

Stumpy, do you still have the mash tun and mash cooling system? If so, how can I get a picture? What are the approximate dimensions on the mash tun?

Share this post


Link to post
Share on other sites

Reduced package price to $165,000. Please make offer if interested. Looking to move.

Share this post


Link to post
Share on other sites

Please contact us ASAP with anything and everything you still have available. Thanks!

Travis & Steve

Three Rivers Distilling Company

Fort Wayne, Indiana

(260)403-2127 (Travis)

(260)797-1637 (Steve)

(260)745-9355 (Distillery)

Share this post


Link to post
Share on other sites

Travis, Steve, and John,

Emails and PMs sent. Please let me know what you think!

Thanks,

Adam

Share this post


Link to post
Share on other sites

Dropping the package price one last time to bottom dollar...$150,000 for EVERYTHING

Share this post


Link to post
Share on other sites

You have still pics? What brand of still?

Hey racerboy. I just shot you a PM with some more info.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×