Jump to content
ADI Forums

Recommended Posts

 

KASON CORPORATION

67-71 East Willow Street

Millburn, NJ 07041

Tel:  973-467-8140, ext 211

Fax:  973-258-9533

Website: http://www.Kason.com

E-Mail: JLing@Kason.com

Model MO-SS Centri-Sifter in 8 Feathers Distillery

 

The best equipment to remove spent grains from their distillery’s discharge stream was found by 8 Feathers Distillery to be Kason Corporation’s Centri-Sifter. Substantially less expensive than alternatives from other manufacturers, the solution simplified equipment needs.

 

Once grain is fermented or distilled, it requires disposal by a means acceptable to the local community.  Craft distilleries, often located within a Publicly Owned Treatment Works (POTW) service area, require strict limits on solids discharged in the waste stream. Since many craft whiskey distilleries use hammer mills to grind grains, the resulting byproduct is too fine to allow lautering as the grain removal method, so an aggressive process like the Centri-Sifter must be used. 

 

When originally presented with 8 Feathers process challenge, Kason Corporation offered the MOS Centri-Sifter with a heavy duty screen as the best separation option – though possible to accomplish with a traditional Vibroscreen, the Centri-Sifter allows higher flow rates while also producing a discharge of spent grain with less remaining free water.

 

After sending a sample of the material to be separated, Kason Corporation conducted a free process test and suggested a screen mesh and paddle design to separate material and minimize the risk of screen blinding.

 

For a small distillery facing these restrictions, the challenge to economically remove spent grains becomes limited and daunting.  Trucking of stillage discharge is cost prohibitive with high water content so producers seek solutions to separate grain from liquid for efficient disposal.

 

Before choosing Kason Corporation’s Centri-Sifter, other separation methods identified included passive settling systems, chemical flocculation, or mechanical separation. Among mechanical separation options considered were filter presses, screw presses, and centrifugal separators.  Initial studies indicated all these as viable choices where presses are the most expensive and centrifugal sifters are the most cost effective solutions.  8 Feathers Distillery studied these options and concluded that mechanical separation using Kason Corporation’s Centri-Sifter offered the best combination of cost, function and efficiency.

 

Though settling tanks provide effective separation, the process requires multiple holding tanks with excessive time and space requirements. Use of chemical flocculation renders the spent grains unfit for use as animal feed – instead they become solid waste which must be disposed of in landfills.

 

A filter press sized to meet distillery needs requires a large compressor to drive air diaphragm pumps.  Without adding some form of solids coagulant to the process stream, the filter cloths require extensive cleaning after each use.  The chemicals which enhance the solids collection render the collected grains unacceptable for use as animal feed. These additional equipment and chemical needs make filter presses, though effective, the most expensive option.

 

Screw presses are appropriate for general industrial use but lack features to clean adequately for a distillery. No press fit within budget, flowrate and footprint constraints of 8 Feathers. While mechanical separation is the best solids removal method, Kason Corporation’s Centri Sifter minimizes cost, time, space, and environmental impacts best within the types considered.

 

After purchase and prior to installation, Kason Corporation supplied mechanical drawings to allow 8 Feathers to construct the necessary platform to house the Centri-sifter.  Once the unit arrived it was installed without issue and began initial testing immediately.

 

The results were as good, or better, than expected.  The unit processed a 1500 gallon, 40% solid test sample fed at 40gpm, without any screen blinding or degradation of performance.  The separated grain was suitably dry for transport by truck. 

 

Now, the MOS Centri Sifter provided by Kason Corporation is in production at 8 Feathers Distillery and provides a key function in POTW compliance while still allowing captured solids to be used for animal feed in an efficient and cost effective grain separation solution.

 

Links to Videos:

 

Kason at 8 Feathers - Video 1

 

Kason at 8 Feathers - Video 2

 

Kason at 8 Feathers - Video 3

 

Kason at 8 Feathers - Video 4

 

 

Kason Centri-Sifter in 8 Feathers Distillery.pdf

Edited by Kason Corporation
eft out contact information

Share this post


Link to post
Share on other sites
Stumpy's    7

We are also using a Kason centri-sifter. It is by far the best solution to separating grain from stillage that we have found thus far. Our farmer loves the quality of the grain he is getting off of it!

  • reaction_title_1 1

Share this post


Link to post
Share on other sites

Presses offer a very dry discharge, but for high flows, the size of the equipment increases as do other ancillary equipment needs. In some cases the Kason can be used to "thicken" the sludge to allow use of smaller presses for a great solution and very dry cake. It really depends on what one is trying to accomplish. In this instance, for the required flows and dryness, the Kason Centri-Sifter offered the most reasonable results.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×