Jump to content
ADI Forums
Glaser Estate

Finish Still, Stripping Still, Hammer Mill and Scale

Recommended Posts

$10,000 - Selling my 500L Hoga.  I had a water bath built, with direct fire natural gas burners.  Heat up time is about 2 hours and the run time can be as quick as 3 hours and as slow as 8 hours depending on how many of the plates you're using and how hard you're running the dephlegmator.  It has a column with up to 10 removable plates, and then a dephlegmator above the condenser.  I've been able to do stripping runs, finishing runs, whisky, rum, short runs of vodka and brandy on this unit, and its size pairs very well with my stripping still.  The water bath helps keep the quality high on your final product.

 

$6000 - 600 gallon custom stripping still.  I purchased the 600 gallon double walled and jacketed tank, added a 2hp agitator with a bronze boat prop and a mechanical variable drive (wired for 110V right now but can be rewired for 220V), put a 3" column and built a copper coiled condenser out of a propane tank.  I've used it with a direct fire burner that is included, it was designed to evenly apply heat over a large area across the bottom to reduce hot spots and burning.  This still will need to get the column reattached after being moved into place.

 

$3000 - 10hp meadow mills hammer mill model5 with fan discharge for flour.  This unit is single phase 220V so it can work anywhere, you can even run it off of a generator easily!  I have 1/16" screen and 1/4" screen.  The hammer mill will need new cloth bags to catch the grain, while being stored I had some rats chew through them.

 

$500 - 1,000# +/-0.2lbs NTEP pallet scale.  I went for the lower weight to get higher accuracy.

 

I would be willing to sell everything together with a bundle price or each piece separately.  I used the large still as a mash tun, so all you would need potentially is a pump and some fermenters to get your distillery started.  I could process 1500# of grain per mash/stripping run and 3000# of potatoes the one time I made a potato vodka.

IMG_1566.JPG

IMG_1734.JPG

IMG_1759.JPG

IMG_1761.JPG

IMG_3511.JPG

IMG_3682.JPG

IMG_4137.JPG

IMG_4138.JPG

IMG_4139.JPG

Share this post


Link to post
Share on other sites

 Are the stills still available? 

 How long have you had them both? 

Can you jump on a call?

My name is Ben. 

Share this post


Link to post
Share on other sites
On 12/29/2017 at 12:33 PM, Bago said:

 Are the stills still available? 

 How long have you had them both? 

Can you jump on a call?

My name is Ben. 

I’m available to chat any time, I sent my number over pm. 

Share this post


Link to post
Share on other sites

Hammer mill is sold and the hoga and scale are pending.  I still have the mashtun/stripping still available.  I'm willing to lower the price to $5000, please contact me if there is any interest.

Share this post


Link to post
Share on other sites

The stripping still/mash tun. Question:

you mash, ferment, and do a stripping run with this setup?

Share this post


Link to post
Share on other sites
38 minutes ago, TomClifton said:

The stripping still/mash tun. Question:

you mash, ferment, and do a stripping run with this setup?

Tom that's right.  When I could only run on the weekends, I would do my mash on Sunday, let it ferment all week, run my stripping run saturday, then run a new mash and a finishing run on sunday.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×