Jump to content
Cameron

380L/100Gal Bain Marie boiler for sale with controls

Recommended Posts

We decided to go a different route and unfortunately never got the chance to use this bad boy. The boiler comes equipped with an agitator and drive motor.

I assembled a control panel for this unit that will be for sale with it. It offers control over all 5 heating elements via PID control or a manual on position for each element individually. It has the ability to control the dephlegmator via PID control and solenoid valves. The panel is currently unlabeled but i have placards for each switch and PID. It has a gauge for column temp, jacket temp, and boiler contents temp. It allows control of the agitator from the panel if the motor is a single phase 240v, but it think the included motor with the boiler is 3 phase so that will not be able to control that. I'm sure i am missing some details but if you have any questions please ask!  Keep in mind this boiler can be heated via steam if you are already set up for it and you can ditch/not require such a control panel.

The boiler is available for immediate shipment and is listed at $9500  Now $8500

The panel and the boiler together will sell for $12000New Total $10500

Located in Virginia

Edit: It has an 8" Tri-clamp flange for column connection.

 

 

 

IMG_20140311_224158771.jpg

IMG_20140311_224133670.jpg

IMG_20140311_224708778.jpg

Share this post


Link to post
Share on other sites

For the control box: Looks like 6 switched SSRs, instead of 5? And there are a couple more SSRs, are those for the motor control, or something else? Looks like each of the heating elements is set up for single phase 120?

Share this post


Link to post
Share on other sites

It has been some time since i assembled this controller, but with the amount of interest i will dig it out from storage and get reacquainted with it. From memory, 5 of the ssr's on the bottom are for switching one leg of a 240v heating element and the sixth one and one of the upper ones are for both legs of the agitator motor. The remaining one at the top left is for the dephlegmator 110v solenoid valve control. The remaining black dc ssr on the upper right is for the actual control switching of the heating elements ssr's. The PID's only have the current to control 3ish ssr's if memory serves me right.  

Share this post


Link to post
Share on other sites

It was made by Stilldragon and has a working capacity of 100 gallons. Max volume is 130 and it has a jacket capacity of 30 gallons iirc. 

Share this post


Link to post
Share on other sites

I didn’t know SD did any control boxes. Where is that one from? Thanks -

Share this post


Link to post
Share on other sites
15 hours ago, Shindig said:

I didn’t know SD did any control boxes. Where is that one from? Thanks -

"I assembled a control panel" seems pretty clear to me?

Share this post


Link to post
Share on other sites
On 9/1/2018 at 1:09 PM, paulNL said:

"I assembled a control panel" seems pretty clear to me?

Oh snap! Sorry...

Share this post


Link to post
Share on other sites

Price drop, $8500 for the boiler $2000 for the panel

Both the controller and boiler are still available. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×