Mulderbri

We are using the jacketed still for whiskey. It makes a great spirit. Here is a photo of my setup. 500 liter stills.

We rinse with the product we are bottling with. We fill the bottle about half way up and dump it back into the drum we are pulling from. It passes back through the particulate filter back into our bottler. The bottles we are using are only slightly dusty from the cardboard boxes they come in. It work for us and we bottle by hand with a TCW 6 spigot gravity wine bottler. Bottles on filler take off and dump and put back on filler.

We have parts inventoried in Canada, Europe, Australia, and the USA. If for any reason we couldn't get a part to you from one of our Reps we can have a part expedited from Poland where the units are made. If by slim chance any repairs might need to be made it can be done by the distillery and if needed with the assistance of myself or other reps via Skype of phone. All of our reps are only a phone or Skype call away. Our service and support is second to none. I use this equipment every day in my distillery and have been for the last two years so I can attest to its reliability. When we were asked to become reps for this amazing equipment we jumped at the chance and haven't looked back. As we grow our own distillery along with the GENIO showroom and training center we welcome any and all visitors that are interested in seeing this equipment in action. My Canadian counterpart is also available at his distillery and GENIO center where he also uses his equipment every day. CHEERS from GENIO USA!

En route to Maryland for the ADI Expo via upstate NY. We are super excited and cannot wait to show you what is in the crate.......actually two crates to be exact. See you in Baltimore at booth 731.

GENIO will be at the ADI expo in Baltimore. Come see us at booth 731. Lots of great equipment will be on display. Stay tune for a list and photos of the equipment that will be on display.

Here are some photos of our forthcoming jacketed MashStill. It is a combination mash tun and still which we will use for mashing and stripping to start as we are already using the existing GENIO 250 still for vodka, Rum and Whiskey. The large manhole will be great for cleaning after mashing and the duplex columns allow for a center positioned agitator (missing from photo) which will give us some amazing mashing results. This MashStill is fully automated and electrically fired and will be set up and used at our distillery in upstate NY.

We use the carbon filter and go straight to the RO system. That same carbon filtered city water is used for our mashing but not run through the RO. We have heard about the chloramine and it not being filtered out in the charcoal filter. indyspirits.....do you think adding the potassium metabisulfate makes that much of a difference?

No gauges on it but it has a bladder. 80 gallon fiberglass.

Our 80 gallon tank cost more than the system. 150 to 200 gpd. Just make sure to filter your water before you send it to the RO. We run our town water through a charcoal filter and then on to the RO filters.

Our GENIO 250 still is running like a champ and putting out some great vodka. It has also made us some awesome Rum that is ageing as I type this. Looking forward to the arrival of the new 250 liter jacketed mashing/stripping still later this month. Can't wait to see what other great innovations are in store for the new year. I will post some photos when the new equipment arrives.

We also have that filler. However we pump through a filter to the tank with a spirits pump. It is manually done with no tank level switch. We have not bottled anything else other than vodka yet. I would think you would have to use a different set of filters for each spirit if you want no cross contamination. You could rinse each filter and let it dry or rinse and let almost dry and pump through some spirit at a higher proof then proof then circulate through one more time then bottle. Hoping others respond to see what others do. Good luck.

we use www.buyactivatedcharcoal.com They have the coconut. They have small quantities and large. It comes rinsed so we don't even rinse. We gravity feed from a holding tank placed above our stainless steel housing and feed into the bottom. It runs really slow by design and gives us great results in one pass. We filter once after proofing down to 90. Happy Filtering.

We have purchased from TCW as well. We have the explosion proof pump and hoses for high proof spirits. https://store.tcwequipment.com/products/flojet-g70-explosion-proof-air-diaphragm-pump?taxon_id=2

DITTO. Weight and an accurate proof. We use a floor scale.