Jump to content

Monster Mash

Members
  • Posts

    21
  • Joined

  • Last visited

Everything posted by Monster Mash

  1. Note on original post above that this is an old 2010 posting by nabs for equipment sold 2.5 yrs ago.
  2. Distillation Equipment NOTE; Additional photos posted in thread) Serious Inquiries Call me at (505) 440-8666 or email for additional questions photos etc Cabezon118@gmail.com I had intended to build a still and start up a distillery operation when I sold my bottling company. I decided to go fishing instead. The following is basically everything you need to build a still except the column. All items are available in Cedar Crest NM approx. 30 minutes from Albuquerque and 40 minutes from Santa Fe. Items are listed in the same order as the photos. I am asking $15K one buyer takes all. Equipment is “as is where is” The descriptions below are accurate and not exaggerated as far as condition/quality goes. 1. 160 gallon stainless steel double walled steam jacketed with 5 inch flange on top and 5 inch sight class on top. Domed top and bottom. Can be fitted with 5hp Mixer (see below). Wall thickness of stainless steel is approx. 5/8 inch. All product fittings are 1.5 inch sanitary fittings. Tank is food grad with electronic sensor to avoid over filling. Legs are adjustable to a sloped floor. Overall tank dimensions including legs 68 inches tall X 40 inches wide. Excellent Condition (photo -1 &2) 2. 125 gallon stainless steel single walled tank 5 inch flange on top and 5 inch sight class on top. Domed top and bottom. Can be fitted with 5hp Mixer (see below). Wall thickness of stainless steel is approx. 5/8 inch. All product fittings are 1.5 inch sanitary fittings. Tank is food grade. Legs are adjustable to a sloped floor. Overall tank dimensions including legs 60 inches tall X 32 inches wide. Excellent Condition. (photo-3) 3. Gas fired low pressure steam boiler Weil McLain model - Gold CGa CP3943601. (photo – 4) 4. 180 gallon single walled stainless steel tank with agitator motor (1 HP). Simple tank with a lid. Could be used to make a mash-ton or fermenter. Good condition. (photo 4) 5. Variable speed explosion proof Lightning Mixer model XJC 30, Has an assortment of three paddles for stirring all stainless steel for product contact. Food Grade. Excellent Condition. 6. Condenser Column 52 inch long X 6 inches wide all stainless condition all sanitary 1.5 inch tri-clamp sanitary fittings. Excellent condition. Very efficient and does not allow product loss. Excellent Condition. Only used to chill water. (photo 5) 7. Pipe approx. 60 ft. 1.5 inch stainless steel pipe with sanitary fittings throughout. Many small pcs - elbow, T’s, Inline temperature gauge, many air actuated valves and lots of tri-clamp fittings. (Excellent Condition). Used only for 96% Ethanol and water. 8. 6 sets of stainless Steel Shelving /Racks. Length varies from 4 ft. to 8 ft. long 4 sets of shelves on each unit. Good Condition. 9. Two Stainless Steel cylindrical filter housings one three ft. long x 6 inches wide with 1.5 inch sanitary fittings in and out. Second one is 24 inches long X 6 inches wide 1 inch NPT in and out. Excellent Condition 10. Small air compressor capable of driving all air actuated fittings and Diaphragm Pump (below). Excellent Condition. 11. Approx. 200-300 ft. air hose. Some Good Condition some excellent condition 12. Metallic Air Operated Double Diaphragm 1:1 ratio Pump. Ingersoll Rand ARO 1 inch, model – 66610X-XXX-C. Rated to 35 gpm. Excellent condition. 13. Three (3) Step Stainless steel steps on wheels. Allow easy access to top of tanks Excellent Condition 14. Plastic Utility Sink Good Condition 15. Two (2) ton Pallet Jack Good Condition. 16. Analytical balance 3 decimal places (grams) and various lab equipment. Good Condition 17. Various items available for the taking such as smaller tanks, 1L bottles with 38 mm screw caps, Tubs, Carboys, Buckets, tools etc…
  3. Just buy one NBS certified and keep it and documentation in a safe place. Then use it to calibrate check your working hydrometers against and record data in a lab notebook. Make sure you sign each time. Check your working hydrometers once a month or at least once a qtr.
  4. What you described should work fine. I would leave an inch or more below it making sure you clear the valve. You can get a real even mash if you mash in from below. Make sure you have pleanty of support since kinda thin. Cheers
  5. You may want to check TTB regulations.
  6. CIP stands for cleaning in place. What is the size of your mash tun in gallons or liters? What is the shape (cylinder, rectangular...)? What are the dimensions? Once all that is known I can probably help you design one from off the shelf parts. What is (are) the size(s) of pumps you already have?
  7. I would suggest setting up a CIP loop. You can set one up for pretty much any size vessel fairly cheap. Then You can use it for cleaning your fermenters and the rest of your vessels.
  8. No minimum but you still have to do all the paperwork just showing zeros. Also state "no production this period"
  9. Lactose is unfermentable. Brewers use it to make milk stout which os often referred to as sweet stout since the lactose is unfermentable the final product retains sweetness. Cheers.
  10. I have a RACE semiautomatic labeler for sale capable of pressure sensative labeling for a label with a label height of up tp 7". It is like new condition. Call (505) 440 8666. I will pack and tship for $1800. $$$$$$ SOLD $$$$$$
  11. I have an SGA 21 Pacific Ozonator for Sale. $4800. It is like new. It will produce 7000 gallons per day of heavily ozonated water. Ozonated water works beautifully for for removing off flavors, off taste and color from wooden casks. Once ozonation process is complete you are left with sterile and oxygenated water. It will work on single phase power 110V. It weighs approx 100 pounds and dimensions are 22" X 20" X 11" It comes complete with a 1 HP Sanitary pump that can be used for many other applications or simply as recirculation. It is available for immediate shipment from New Mexico. Delivery can be arranged for a nominal fee depending on your location. For questions call me at (505) 440 8666 or email me directly if you would like to cabezon118@gmail.com. Photo attached. Cheers.
  12. see updated post with more detail and contact info. Thanks - Mike
  13. See new posting more info and contact info supplied. Thanks - Mike
  14. We were a rectifier and bottling plant in Albq. We have two (2) 500 gallon stainless steel tanks. All food grade and never used for anything but water. We will sale for $2500 each or both for $4000. Please contact me directly if you would like Mike (505)440-8666. We will load on a truck for you. Tanks are located in Albuquerque NM. Send your email address to me at cabezon118@gmail.com if you are interested and would like photos. For some reason I was not able to attach photos to this posting. The tanks are in excellent condition and the dimensions are approx 6 ft wide and 9 ft tall.
  15. We were a rectifier in Albuquerque NM. We have 9 pallets of bottles totalling 6464 bottles in 6 pack case boxes and sleeves. The bottles are coated black. They are 750mL. We have 16000 t tops (black)19.8mm and 25000 black shrink sleeves with gold tear tabs that fit this cap and bottle. We closed our bottling operation and these must go. Bottles $0.20 each, tops $0.05 each and sleeves at $0.05 each. Quantity discounts if you take it all. For some reason I was not able to attach photos to this posting. If you would like photos or additional information call me directly at (505) 440-8666 or email me at cabezon118@gmail.com.
×
×
  • Create New...