Jump to content

mepalo

Members
  • Posts

    6
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Interests
    Golf, fishing, and my granddaughters

Recent Profile Visitors

1,220 profile views

mepalo's Achievements

Newbie

Newbie (1/3)

0

Reputation

  1. McGinnis Wood Products in Cuba, MO 573-885-3524
  2. TryjvmnstrrtttttrTry McGinnis Try McginnTRTry
  3. Cowdery, when you say "getting a federal license", are you refering to an ethanol fuel permit or a distilled spirits license? Thanks. Jim
  4. Greetings ADI forum readers. We have developed a prototype bubble cap column that will be an affordable alternative to high priced stills. This column is all copper (welded) with bubble cap plates and downcomers. It also includes a dephlegmator on top for control. The product condenser is a shell and tube type. Thanks to Bill Owens and the guys at Amalgamated Distilling in St. Louis, we were able to do test runs using their 60 gallon direct fired kettle. This was accomplished with the use of an adapter that was custom fitted to their still. The column performed quite well; if anyone would like to see data that was collected during these runs, or any other info regarding the column, please contact me. Best regards. Jim Schultz Metal Fabrication Designs, LLC 314-259-1572 jschultz@semo.net
  5. Yes, this model has been tested and the condenser works very good when used as a spirit still. However, anyone purchasing this size still will recieve a longer condenser so that it can be used for both wash runs and spirit runs. Attached is a photo of a 12 gallon model. Jim Schultz
  6. Hello to all in the craft distilling business. My name is Jim. I am located in Missouri and have been in the metal fabricating business for over 20 years. We have come up with a design for copper gooseneck pot stills. The photo shows our 5 gallon model, but other sizes and variations are available. The smaller ones are great for experimental batches. Please contact me if you are interested or have any questions. Jim Schultz Metal Fabrication Designs, LLC 314-259-1572 jschultz@semo.net
×
×
  • Create New...