Jump to content

Low wines - Do you use the whisky column?


Recommended Posts

Hi fellow distillers,

We have a vodka still with a whisky column (5 plates)and a vodka column (21 plates).

When we make our low wines, we use the whisky column and bypass the vodka column.

Should we bypass the whisky column also? So the run will be shorter. Will it affect the yield or final product?

We usually make our low wine run with no cuts, and run it down until it reach 10 abv. Final low wines are at 45 abv.


Any thought? Any advice?


Thanks to all.


Link to comment
Share on other sites

Does your still have a helmet of any type?  Any reflux outside of the whiskey column?

Stripping runs should be hot and fast.  You are just "stripping" as much avb as possible... not worrying about cuts or plates and adjustments.... but you will need some reflux. 

Lastly, if you bypass the columns you will have less column cleaning to do.

But vapor contact with copper in the stripping run might make a better end spirit.

I would try it both ways and see what you think comes out better.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...