Hogback Distillery Posted June 22, 2019 Share Posted June 22, 2019 Never used all-stainless insulated Lauter Mash tun. 420gal/1600ltr capacity (60" x 40"). Dished top and bottom with false removable floor. Top mounted agitator, rake and plough for easy emptying. Top mounted manway and front man door. This is part of a system to produce 1 x53 gallon per batch. Purchases to arrange collection from Colorado $12,500 Link to comment Share on other sites More sharing options...
navenjohnson Posted June 22, 2019 Share Posted June 22, 2019 Who was this built by? Doesn't have steam jacket and cooling jacket? Link to comment Share on other sites More sharing options...
Hogback Distillery Posted July 2, 2019 Author Share Posted July 2, 2019 Sorry for the delay but ive just seen your message in my spam folder. The mashtun has a cladded jacket but is not regulated by steam or glycol. Feel free to call me on 720 357 9320 if you want to discuss in case future emails end up in my spam folder which I dont check very often Link to comment Share on other sites More sharing options...
Dsking416 Posted July 3, 2019 Share Posted July 3, 2019 What is the heat source? Link to comment Share on other sites More sharing options...
Hogback Distillery Posted July 4, 2019 Author Share Posted July 4, 2019 This is a mash tun rather than a kettle so it does not have a method of self heating. Rather, you would add hot water and the insulated jacket helps to hold the temperature. Link to comment Share on other sites More sharing options...
Hudson bay distillers Posted July 5, 2019 Share Posted July 5, 2019 That is a nice unit hope someone snaps it up. A heads up tho , when I zoom in on the welds where the top manway is welded to the the collar I see you have a similar problem that we have . We have a 45 gallon r and d still that has welds that are under cut away too deep . We had welds inspected and inspector pointed out all the welds that were factory and how good they looked and the ones that were added by the vendor that were chancy . He assured us they would probably hold but recommended we get them re welded by a different welder . On the topic of heating what is the fitting on the jacket jus to the right of the bottom manway . Is it in the jacket or does it go through to the inner tun . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now