perfection Posted March 9, 2020 Share Posted March 9, 2020 I do understand that continuous (column) stills are more efficient due to their throughput and non-stop feed of wash, but I would like to know whether repeated distillations ( I believe it is called rectification) in a pot still could produce neutral spirit with almost no congeners identical to a continuous still Do/can continuous stills produce neutral spirit in a single run? or are they also rectified to get neutral spirit? Link to comment Share on other sites More sharing options...
Southernhighlander Posted March 9, 2020 Share Posted March 9, 2020 Our vodka stills have 20 plates so that you can do 21 distillations in one run. They are pot stills. They are not continuous. paul@distillery-equipment.com http://distillery-equipment.com Link to comment Share on other sites More sharing options...
whiskeytango Posted March 9, 2020 Share Posted March 9, 2020 32 minutes ago, Southernhighlander said: Our vodka stills have 20 plates so that you can do 21 distillations in one run. They are pot stills. They are not continuous. paul@distillery-equipment.com http://distillery-equipment.com I think he Is meaning more along the line of a traditional pot still. With no plates. Id say no but that's just me.. Even though a very prominent vodka brand form Texas says they do it.. Link to comment Share on other sites More sharing options...
Southernhighlander Posted March 9, 2020 Share Posted March 9, 2020 1 hour ago, whiskeytango said: I think he Is meaning more along the line of a traditional pot still. With no plates. Id say no but that's just me.. Even though a very prominent vodka brand form Texas says they do it.. I certainly wouldn't distill 20 times for vodka in a pot still. Titos Vodka is worth over $1,000,000,000.00 last I heard. Talk about a success story. Someone told me a few weeks ago that they have grown so large that they may start making their own GNS because it will lower their costs. I guess they have came full circle. 1 Link to comment Share on other sites More sharing options...
Silk City Distillers Posted March 9, 2020 Share Posted March 9, 2020 True pot? No plates? Easy. Fill it with 190 proof, run it. 190 proof comes out. Take a token heads cut, maybe leave a little behind as tails. 1 Link to comment Share on other sites More sharing options...
DrDistillation Posted March 10, 2020 Share Posted March 10, 2020 14 hours ago, Silk City Distillers said: True pot? No plates? Easy. Fill it with 190 proof, run it. 190 proof comes out. Take a token heads cut, maybe leave a little behind as tails. Watch it Silk City Distillers, you're giving away the Tito's formula. I don't think I'd load a pot still with 190 proof spirit, but would dilute it down to at least 60%, but that's just me. Since Vodka is normally 60% water and 40% alcohol the water used becomes an important part of your final taste. This would give you a chance to play with different water profiles used to dilute the spirit prior to running. A mineral rich water for example will leave most of the minerals in the pot, but by default some will make it through giving your product something slightly unique compared to other bottles on the shelf. It will leave it a different mouth feel compared to dilution with RO or distilled water (good or bad). The starting ABV,, the water used to dilute and the speed of the run (natural reflux) will all affect the profile of the vodka produced and is worth playing with a bit if you go down this route of starting with GNS and rerunning it in a plain old pot still. Even the temperature of the cooling water will come into play on the profile of the spirit. Colder water will condense the vapor faster at the start of the condenser vs warmer water that allows the vapor to travel further down the condenser before it cools to a liquid. Of course the water used to dilute the spirit to 80 proof (bottle proof) will play a huge amount in the final profile as well. Even if you never intend to produce vodka this way, it's a great set of experiments to run with neutral to see how these changes affect the profile of the spirit being made which you can then apply to your brown or other flavored spirits. People who make gin in a pot still for example know the difference the initial charge makes (all else being equal) and a 30% vs a 45% charge makes a different spirit with one being "more dry" than the other. Of course the botanicals come into play (like any flavor) but this holds true for neutral as well to a limited amount. 1 Link to comment Share on other sites More sharing options...
HedgeBird Posted March 10, 2020 Share Posted March 10, 2020 21 hours ago, perfection said: I would like to know whether repeated distillations in a pot still could produce neutral spirit with almost no congeners identical to a continuous still Yes, it is *possible* to get neutral spirit from repeated distillations on a pot still. It is not however practical or really safe to do so.. 21 hours ago, perfection said: Do/can continuous stills produce neutral spirit in a single run? or are they also rectified to get neutral spirit? Some continuous stills are designed to get finished product on a single run, others are not and require further distillation. 1 Link to comment Share on other sites More sharing options...
perfection Posted March 17, 2020 Author Share Posted March 17, 2020 On 3/9/2020 at 11:22 PM, Southernhighlander said: Our vodka stills have 20 plates so that you can do 21 distillations in one run. They are pot stills. They are not continuous. paul@distillery-equipment.com http://distillery-equipment.com Dis not understand.... Are not plates in a rectifier column supposed to make up a continuous still? So whats the difference? Link to comment Share on other sites More sharing options...
meerkat Posted March 17, 2020 Share Posted March 17, 2020 You can have plates (or packing) in continuous stills and in batch stills. The purpose of the plate (or packing) is to increase the enrichment or rectification. Basically these plates emulate the repeated pot still distillations you suggested in your first post. I suspect this is why Southernhighlander said he can do 21 distillations in one run - 1 for the pot plus 20 plates. In a column the stages are simply stacked on top of each other rather than being separated in time (as they would be with repeated pot still runs). The difference between a continuous still and a batch still is that (theoretically) all the strengths remain constant in a continuous still, but will change with time in a batch still. In a large continuous plant the columns will run 24/7 - always receiving the same strength feed and delivering the same strength product. I have never seen a single *continuous* column capable of producing neutral spirit. Typically there would be at least 4 continuous columns in series to make neutral spirit. The first column is the stripper and it produces about 30-40 ABV spirit. The second column is a rectifier that will make "industrial grade" 95 ABV alcohol. Heads are removed from each of these first 2 columns. The spirit from the 2nd column is diluted down to around 15 ABV with clean water and fed to the hydroselection column. This is an "upside-down" column and the product comes off the bottom and is taken to the final rectifier where it is enriched to 95-96 ABV. Beyond these 4 columns there could be 2 or 3 more columns for low grade recovery, de-methylation etc. You can (thousands of distillers do) make neutral spirit in a single *batch* still of the type described by Southernhighlander. The difference between doing it in a single column batch-wise and doing it continuously in multiple columns is that you will get a higher percentage of your alcohol out as neutral grade in a continuous setup compared with selecting only the best "hearts" from the batch still. It is of course far easier to run continuous stills using automatic instruments than it is to run a batch column. Link to comment Share on other sites More sharing options...
Southernhighlander Posted March 18, 2020 Share Posted March 18, 2020 On 3/17/2020 at 2:29 AM, perfection said: Dis not understand.... Are not plates in a rectifier column supposed to make up a continuous still? So whats the difference? What Meerkat said. Link to comment Share on other sites More sharing options...
Bakery87 Posted March 27, 2020 Share Posted March 27, 2020 Also, number of plates doesn't always equal number of theoretical plates. Calling a pot=1 and each plate=1 isn't always correct. Every system is different and it can be calculated with proper measurement. I'm guessing Southerhighlander has enough info to state what he manufactures. Pot stills will have different necks, onions, lyne arm direct, etc and thus will have drastically different numbers. Your pot still might have 3-4 theoretically plates. But he's also correct saying you'd have to distill many times to approach what he's making in one pass, and your last charge would be very high proof going in. Depending on your system type, you probably would have to leave a lot of good liquid behind as to not damager your equipment if you fall below a heating element. Link to comment Share on other sites More sharing options...
perfection Posted March 27, 2020 Author Share Posted March 27, 2020 Thanks a lot each one of you. Much clearer now.... Does this further imply that each plate in the rectifying column is at a marginally higher temperature than the one below it and can the temperature of each plate be controlled externally or manually? and WHY wash with water if the distillate has to rectified in another set of 2 to 3 columns (like for vodka I assume)? Link to comment Share on other sites More sharing options...
meerkat Posted March 27, 2020 Share Posted March 27, 2020 Each plate is at a slightly *lower* temperature than the tray below it. In a typical vodka column the base would be at >100°C (212°F) and the top at around 80°C (176°F) - but these will vary with time in a batch column. The way to understand the temperatures is that boiling causes the more volatile component (ethanol) to move to the top of the column while the less volatile component (water) concentrates at the base of the column. The top product containing more ethanol than the base product will have a lower boiling point than the base product. And each plate will contain a slightly higher concentration of ethanol than the tray below it and therefore be at a slightly lower temperature than that tray. When we control the heat input or reflux on a column it seems as though we are controlling the temperature, but in fact we are controlling the composition and the change in temperature is a *result* of the change in composition. It may seem that the change in temperature is causing the change in composition but it is really the other way around. You cannot control the temperature of each tray individually. As you change the heat input or reflux the entire temperature profile in the column will change. We use temperature as the parameter to measure because it is the fastest and cheapest measurement to make to indicate the composition, which is what we really want to control. Another important factor in large vodka columns is that any change in composition profile across all the plates will result in different temperature changes on different plates. This means that the temperature swing will be much higher on some plates than on others, so we can use these sensitive plates to measure the temperature and get the quickest indication of a change in composition profile. So you get the seemingly strange situation where the reflux to the top plate is controlled by the temperature 2/3 of the way down the column. The reason for washing with water is complex. Basically, the *relative* volatility of different alcohols changes according to the amount of water present. By increasing the amount of water you can cause a higher alcohol (eg amyl alcohol or fusel oil) which would normally be less volatile than ethanol and therefore concentrate near the base of the column to increase in relative volatility and therefore migrate to the top of the column in higher quantities. The calculations are horrendous and even the most powerful computer simulations struggle with the hydroselection column. When I have had to design these columns I simply took the number of trays and water feed ratio from plants that worked well, and limited my design to getting the plate hydraulics optimized for capacity and pressure drop. Link to comment Share on other sites More sharing options...
Bakery87 Posted March 27, 2020 Share Posted March 27, 2020 I forgot to mention earlier... If you have a packed column e.g. just a column filled with glass beads or other packing material, your theoretically number of plates would be very high. If you could pack whatever is coming off the top of your pot you could have a lot of "plates" in there, theoretically. If you ran a recycle stream from your effluent back to one of your "plates" you'd change the composition of that area, and you'll get an even higher proof of of your system. There are a lot of ways to increase your separation with modification, which would put you into a hybrid system at that point. Meerkat is spot on with each plate being cooler as you progress upwards in your column, due to the change in composition. It's a weird concept for a lot of people to grasp when we always hear "hot air rises". It's really just "less dense rises", and with air you don't have a compositional change like you do during distillation. Link to comment Share on other sites More sharing options...
DrDistillation Posted March 27, 2020 Share Posted March 27, 2020 Here is a really good video that might teach you a lot about the distillation process talked about here. This is a video made for Shell about crude oil distillation but the process is very similar for many parts of the process. This gives a really good overview of distillation and how plates are used. Once you've watched this and have a good understanding of how this works you can search for specific videos on Youtube for vodka distillation or other spirits and understand what you are seeing much easier. Link to comment Share on other sites More sharing options...
needmorstuff Posted April 5, 2020 Share Posted April 5, 2020 On 3/9/2020 at 7:46 PM, Southernhighlander said: I certainly wouldn't distill 20 times for vodka in a pot still. Titos Vodka is worth over $1,000,000,000.00 last I heard. Talk about a success story. Someone told me a few weeks ago that they have grown so large that they may start making their own GNS because it will lower their costs. I guess they have came full circle. I love Tito's story... but are you saying their vodka is made with GNS? if so i just died a little bit inside. Link to comment Share on other sites More sharing options...
kkbodine Posted April 5, 2020 Share Posted April 5, 2020 2 hours ago, needmorstuff said: I love Tito's story... but are you saying their vodka is made with GNS? if so i just died a little bit inside. From some early video coverage of Tito's it seemed very clear that they used GNS. I have not been inside their facility to see for myself. Link to comment Share on other sites More sharing options...
needmorstuff Posted April 5, 2020 Share Posted April 5, 2020 58 minutes ago, kkbodine said: From some early video coverage of Tito's it seemed very clear that they used GNS. I have not been inside their facility to see for myself. I didn't know that! Link to comment Share on other sites More sharing options...
DrDistillation Posted April 5, 2020 Share Posted April 5, 2020 Here's another similar. https://www.drippingspringsvodka.com/our-vodka/ "Dripping Springs is micro-distilled 20 times in copper pot stills in small 50-gallon batches. It is then mixed with pure, mineral-rich artesian spring water from the Texas Hill Country before a final clarifying slow filtration through Swedish activated charcoal. Dripping Springs is lush and balanced, with a smooth finish." When you view the distillery on Google with a sat view you don't see grain silos. It's usually a pretty safe assumption that without grain silos you won't be distilling from scratch but starting with GNS. Starting with a mash, I wonder how long it would take to do 20 actual distillations in a 50 gallon pot still filled what 40 gallon with a charge? Link to comment Share on other sites More sharing options...
Roger Posted April 5, 2020 Share Posted April 5, 2020 Funny stuff :) Link to comment Share on other sites More sharing options...
needmorstuff Posted April 6, 2020 Share Posted April 6, 2020 14 hours ago, Roger said: Funny stuff I know! I have looked at that picture a dozen times and I still can't figure out what the hell is going on. They pot still GNS 20 times? to make it purer? really? Link to comment Share on other sites More sharing options...
DrDistillation Posted April 6, 2020 Share Posted April 6, 2020 You notice how the condenser feeds directly into the 55 gallon barrels? It looks like every single still is setup the same way. How do you suppose they make cuts? Maybe that's why they need that Swedish activated charcoal. LOL Their web page also says besides vodka they make gin in 40 gallon batches. Again if using these same stills, how do they make any type of cuts? What a waste of equipment that could be making some good whiskey or something it's designed to make a whole lot better/easier! Link to comment Share on other sites More sharing options...
Roger Posted April 6, 2020 Share Posted April 6, 2020 You dont make cuts when making vodka from GNS. The "pot still" charade is just a way to move the spirit from a category to a class. It can also be done with filtration, or the wave of a pen on a processing report. It's just marketing. Link to comment Share on other sites More sharing options...
needmorstuff Posted April 6, 2020 Share Posted April 6, 2020 CRAZY TIMES Link to comment Share on other sites More sharing options...
DrDistillation Posted April 6, 2020 Share Posted April 6, 2020 Personally, I'd still make cuts if pot stilling GNS after diluting with water as you'll be able to remove more and clean up the spirit a tad bit more. Cuts would be very small for vodka. Gin on the other hand will need normal gin style cuts due to the botanicals. But unless there is more than meets the eye in that photo I don't see a way to make any cuts. As already said, pure marketing at a huge waste of energy! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now