whiskeytango Posted April 17, 2020 Share Posted April 17, 2020 Just wondering where everyone thermometers are on their mash tuns. Ours is on the outside edge so they will be out of the way of the rake but it seems like our temp is not super accurate due to being close to the jacket. So wondering where everyone else has their thermometers? Link to comment Share on other sites More sharing options...
Copper Sky Distillery Posted May 29, 2020 Share Posted May 29, 2020 Ours was set up the same way (on the outside) Switching over to laser/infrared gun. Check the top of your tank and the bottom. Hope this helps Link to comment Share on other sites More sharing options...
PeteB Posted June 7, 2020 Share Posted June 7, 2020 If you have an effective agitator it shouldn't make much difference where the probe is. I bought an infrared temperature gun. It is useless if there is steam or the surface is shiny so that rules out the mash or the still. There may be guns that with work through steam and shiny surfaces. Link to comment Share on other sites More sharing options...
Hudson bay distillers Posted June 8, 2020 Share Posted June 8, 2020 Agree with pete 100 percent ...adijitator should give u consistant temp .....infa red guns have proved useless to us Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now