Henrickson Posted January 21, 2021 Share Posted January 21, 2021 Hello, we are opening a new nano distillery with a 150 G hybrid pot still , 150 G mash/tun and 3 x150 G Fermenters. Our village water averages 12C , has 490 hardness, with calcium carbonate, pho’s, 1 PPM chlorine almost 0 chloramine, some Fe, pH=7.4 my water plan so far was to soften and UV it then into condensers/deflags , then hit through IV and into black HDPE insulated (hot tank)then into mash/tun and clean up. If no water in hot tank then ,softened/UV into instant hot water boiler and out to mash. Also, softened/UV into RO for proofing/blending Any suggestions? Improvements? Thanks Link to comment Share on other sites More sharing options...
SlickFloss Posted February 8, 2021 Share Posted February 8, 2021 I would recommend getting advanced testing done on your ground water at your Tap and at the well head pre treatment. It wil change the way you look at water. I will PM you a reference Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now