Jump to content

Cheap RO system install: How it started/How it's going


Foreshot

Recommended Posts

I'm sharing this post so that people interested in starting a small distillery will see some of the trials and tribulations of what you're going to have to deal with.

We're that in between size of distillery. The "tween" size. We're looking for a bigger space so we can get bigger equipment. So we bought a cheap RO system that does 50g a day and came with a 3g holding tank. Up to now that's been fine. Now though we've started needing more like 10-15g a day. The system can do it but it does it slowly. So we bought a bigger holding tank. I got all the fittings, plumbed everything up, and installed it. Awesome? No. So let's walk through what I had to deal with. Let's see how it started:

PXL_20210815_183251151.thumb.jpg.3bb968e13ce4e10ad9b4758bde571e54.jpg

Everything looks great, yes? All prim and proper. And so began the issues. It started out fine. But it would only hold like a gallon before the system stopped. I had an inkling that it was pressure related. The system runs off of mains pressure and does not have an electric pump. Because of that it can't build much pressure.  So I turned the tank on it's side. That reduced the pressure as it didn't have to push up against the water column. It started working again but stopped after another gallon or so. So I took it to the next step:

PXL_20210815_184412103.thumb.jpg.e049ecff04942fb85087b50637c6f5a7.jpg

I did that an now it's working better. It seems to be filling up. I turned it off as I had to leave and didn't want something bad happening when I wasn't there. I'll turn it back on tomorrow AM and see how it holds up over the day.

I'm anticipating that I'm going to get folks saying what I'm doing is a bad idea. I don't disagree. But until I figure something else out that's what we have.

For those thinking about starting a small distillery this is the dumb day to day stuff that you have to deal with.

 

 

Link to comment
Share on other sites

Run the output hose into the top of a 55 gallon drum. Then it just steadily streams into the drum. Problem solved.

You will have to mindful of turning it on and off at the right times. Or you can build an automatic shutoff system.

Link to comment
Share on other sites

I am not saying that this is a good or bad idea but I have heard that RO water can recognize sitting in plastic plumbing too long if it is not on a ring, I wonder what liability is with still water over time, like say a weekend. We are recommended to run our labs (RO supply with no return) tap for a few minutes every Monday when coming in from a shut down weekend

 

 

Cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...