Jump to content

Dungeons Distillery Newfoundland 300 Liter still


Recommended Posts

Hi there, its been a while going through the red tape. I need to brush back up on my volumes and outputs for my 300 Liter still (79 Gallon). If i ran it hard, (14 hour period), what do you think my output may be? I have 3 1200 liter ferment tanks. Joined in 2017 and here we are.......

As an FYI an F3 building classification is possible.......after 3.5 years. We received ours in April 2022Design for DYE-300L-III-Ф219 distiller 2020.03.21[39575].pdfDesign for DYE-300L-III-Ф219 distiller 2020.03.21[39575].pdfDesign for DYE-300L-III-Ф219 distiller 2020.03.21[39575].pdfDesign for DYE-300L-III-Ф219 distiller 2020.03.21[39575].pdf

Link to comment
Share on other sites

2 hours ago, Dungeons said:

F3 building classification is possible

What is the benefit of an F3 classification vs F-1/S-1?

Link to comment
Share on other sites

F1 is a Distillery as per National Building Code.  More fire ratings and separation.  Doors rated, clearances from other buildings., distance to exits, materials used for construction...Quite an additional cost.

The difference between the Low and Medium Hazard Industrial Occupancies is related to the combustible content of the contents of the building in question and not the potential toxicity of those materials.

A Low Hazard Industrial Occupancy (F3) is defined in Part 1 of the Code as being an industrial occupancy in which the combustible content is not more than 50 kg/m or 1200 MJ/m of floor area; similarly a Medium Hazard Industrial Occupancy (F2) is defined as being an industrial occupancy in which the combustible content is more than 50 kg/m or 1200 MJ/m of floor area but not classified as High Hazard Industrial Occupancy.

A High Hazard Industrial Occupancy (F1) is one that contains sufficient quantities of highly combustible and flammable or explosive materials which, because of their inherent characteristics, constitute a special fire hazard. The proponent should be asked to provide details of the combustibility of the materials being stored in the chemical storage area to ascertain whether they would be classified as F1.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...