Edwin Posted May 19, 2014 Share Posted May 19, 2014 Some more info. The iStripper will be a bit over 2 meters in diameter and weight 420 kilo's. Total height is 3.4 meters ... minimum. Minimum? Yes, minimum, because you can add cleaning sections to increase height. One, two, three, or more. Shipped by boat to the port nearest to you! Here's some more info. And a first picture. Well, a first picture of some parts. More pictures after initial testing is done. When? In about three weeks time! http://wp.me/p3pXcR-jm Link to comment Share on other sites More sharing options...
Edwin Posted June 11, 2014 Author Share Posted June 11, 2014 http://wp.me/p3pXcR-jA Here's a picture of the heating system! Link to comment Share on other sites More sharing options...
Edwin Posted June 28, 2014 Author Share Posted June 28, 2014 Installing new heaters to the iStripper as we speak. The "old" ones didn't deliver the power we specified, that's why we made new ones. First tests went great. Only thing was ... we couldn't get to "full throttle". On Monday we will. We will do another test run on 1,200 liters of wash then. By the way, anyone interested in computer & temperature controlled mashing and fermenting? If so, we have a few surprises up our sleeves. More info next week ... On mashing, fermenting as well as on the iStripper. With pics and all. Link to comment Share on other sites More sharing options...
Edwin Posted July 5, 2014 Author Share Posted July 5, 2014 Introducing the iStripper. For mashing, stripping, and finishing. Hey, you can even use it to make gin. Oh, and we just couldn't resist and threw in some automation and computer programming. Makes mashing as well as distilling easier, right? http://wp.me/p3pXcR-kr Link to comment Share on other sites More sharing options...
Edwin Posted July 7, 2014 Author Share Posted July 7, 2014 Here's an impression of the iStripper. If you click on the picture you can enlarge them and get an increadible amount of detail ... http://wp.me/p3pXcR-kJ Link to comment Share on other sites More sharing options...
Edwin Posted August 15, 2014 Author Share Posted August 15, 2014 So we have the first two of these units in transport to the USA. One to Florida, the other to New Jersey. And we changed the name. "iStripper" does not do justice to it, since it does so much more than just stripping. You can make a one run whiskey, gin, rum, vodka, ... you name it. Here's a link to the new product page on our website ... of our iStill One: http://www.istill.eu/#!pristillone/c1fyo More info on the iStill Masher (2000 liter capacity, computer controlled, natural gas & direct steam fired) and iStill fermenter (2000 liter capacity, fully computer controlled) will come soon. We are building the first units as we speak. And I just finished testing the first smaller sized (200 liters) combo model (masher/ferfmenter). Great to work with! Link to comment Share on other sites More sharing options...
Recommended Posts