Jump to content
ADI Forums
Uks Inc

MONOBLOCK FILLER/CAPPER FOR 3 Lt BOTTLES

Recommended Posts

MONOBLOCK FILLER/CAPPER FOR 3 Lt BOTTLES

OFFER : 10339-18

PRICE EX-WORKS 

900 BpH: $73,970.00

300 BpH: $64,020.00

MAIN TECHNICAL AND CONSTRUCTIVE FEATURES.
- Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors
- Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches
- Parts in contact with the liquid of stainless steel AISI 304
- Power transmission by means of gears
- Inlet and outlet star-wheels with safety devices
- Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box

1. 10-VALVE FILLER
- Parts in touch with the liquid in stainless steel AISI 304
- Pneumatic lifting cylinders with air pressure lift and descent with cam.
- Tank height adjustment device for the format change
- Power transmission by means of gears
- Bottle inlet by means of a screw
- Inlet and outlet star-wheels with safety devices
- Liquid feed pipe with pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container
- Control of the liquid in the tank by means of probes or level relays
- Outlet of the feeding pump controlled from the control board
- Valves easy to demount for cleaning and maintenance
- Tank with rounded bottom for the total discharge of the liquid
- Ball valve for the total discharge of the liquid contained in the tank
- Electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box.
- Filling with GRAVITY system


2. SINGLE HEAD CAPPER FOR ALUMINIUM SCREW CAPS
- Vibrating hopper for cap selection
- Cap chute with detection photocell
- Distribution head
- Threading head with 4 rollers and “no cap / no roll” system
- Manual lifting for format change

AUTOMATIC LABELLER FOR AUTOADHESIVE LABELS – FOR BIG BOTTLES


Machine suitable for application of self-adhesive labellers on glass bottles. The standard version is equipped with step motors and electronic speed driver.
The machine is equipped with electromechanical emergency stop device (product stop), activated in case of failure in the automatic packaging cycle and that can be used in manual mode for maintenance operations.

Speed: MAX 1000 bph

MACHINE SUPPLIED COMPLETE WITH :
- Complete safety covers with plexiglass panel
- Infeed screw for bottle separation at the inlet
- In-line machine with N.1 labelling unit
- Labelling unit motion by stepping motors
- Labelling unit supplied with a loading plate for a roll Ø.240 mm max.
- Labelling unit adjustable in height, for the easiest adjustment to the different types of labels and bottles
- Start signal for label release by precision sensor
- Speed of labelling unit synchronized with the speed of the machine
- Machine base-frame completely covered with stainless steel plate
- Aluminium parts covered with anti-rust painting
The base machine is complete with:
- N.1 station for application of front label on CYLINDRICAL glass bottle
- Bottle collecting table (50x100 cm)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×