Uks Inc Posted March 11, 2019 Share Posted March 11, 2019 MONOBLOCK FILLER/CORKER FOR SPIRITS - 2000 BpH (SQUARE AND CYLINDRICAL BOTTLES) Offer: 10739-19 IMPORTANT NOTE: THIS MONOBLOCK CAN WORK BOTH SQUARE AND CYLINDRICAL BOTTLES TYPE OF MONOBLOCK: FILLING 16 VALVES - CAPPING 1-HEAD MODEL: 16-1 PP VARIABLE SPEED DEVICE: ELECTRONIC VARIATOR LIFTING CYLINDERS: PNEUMATIC FILLING SYSTEM: BY LOW VACUUM N° OF FILLING VALVES: 16 LIQUID THAT CAN BE USED: NON DENSE SPIRITS MAX PRODUCTION IN BPH: MAX 2.000 x 1 lt CAPPER FOR PLASTIC CAP: ALEXA PP NUMBER OF CAPPING HEADS 1 TYPE OF CAP: BARTOP CORK CLOSING HEAD: WITH VACUUM OR GRIPPER CAP FEED: BY MEANS OF A VIBRATING SYSTEM CAP SIZE: TO BE CHECKED DIAMETER OF THE BOTTLES: MIN/MAX 55/110 mm HEIGHT OF THE BOTTLES: MIN/MAX 180/350 mm PRICE EX-WORKS: $78.597.00 OPTIONS CHANGE PARTS FOR DIFFERENT BOTTLES SIZES (CYLINDRICAL): $2,153.00 CHANGE PARTS FOR DIFFERENT BOTTLES SIZES (SQUARE): $2,829.00 ACCESSORIES FOR ANOTHER FORMAT OF BARTOP CORK – TO BE CHECKED AFTER SAMPLES CHECKING: $7,011.00 SYSTEM FOR FILLER CLEANING WITH DUMMY BOTTLES AND SPRAYBALLS IN THE BOWL: $8,363.00 PACKING: $1,476.00 MAIN TECHNICAL AND CONSTRUCTIVE FEATURES. - Chassis of the machine in sturdy mechanical carpentry completely clad in stainless steel AISI 304 with wide lateral access doors - Safety guards in compliance with the CE norms with panels of plastic material and safety micro-switches - Parts in contact with the liquid of stainless steel AISI 304 - Power transmission by means of gears - Inlet and outlet star-wheels with safety devices - The electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box 1. 16-VALVE FILLER - Parts in touch with the liquid in stainless steel AISI 304 - Pneumatic lifting cylinders with air pressure lift and descent with a cam. - Tank height adjustment device for the format change - Power transmission by means of gears - Bottle inlet by means of a screw - Inlet and outlet star-wheels with safety devices - Liquid feed pipe with a pneumatic ball valve in stainless steel AISI 304 for the control of the liquid flow in the container - Control of the liquid in the tank by means of probes or level relays - The outlet of the feeding pump controlled from the control board - Valves easy to demount for cleaning and maintenance - Tank with a rounded bottom for the total discharge of the liquid - Ball valve for the total discharge of the liquid contained in the tank - The electrical system in compliance with the international safety norms with low voltage controls contained in a stainless steel box. - Filling with LOW VACUUM system 2. SINGLE HEAD CAPPER FOR BARTOP CORK - Vibrating hopper for cap selection - Cap chute with detection photocell - Pick&Place system for picking up the cork from the cap chute and positioning it under the closing head - Closing head with a vacuum system for keeping the cork - Manual lifting for a format change Link to comment Share on other sites More sharing options...
jackb1050 Posted October 20, 2019 Share Posted October 20, 2019 will it do flask bottles? Link to comment Share on other sites More sharing options...
Uks Inc Posted October 21, 2019 Author Share Posted October 21, 2019 Hello, Thanks for your email. We need to check bottle drawings, please. Best regards, Al Link to comment Share on other sites More sharing options...
Uks Inc Posted October 22, 2019 Author Share Posted October 22, 2019 Hello, I've talked to an engineer. The machine can likely handle flask bottles, but better to see bottle drawings before confirming it. Thanks! Al Link to comment Share on other sites More sharing options...
Georgeous Posted September 26, 2020 Share Posted September 26, 2020 is this still available? is this new or used? can i get some photos? Link to comment Share on other sites More sharing options...
Uks Inc Posted September 28, 2020 Author Share Posted September 28, 2020 Hello, The machines are available for order. The machine video (link) and our website enclosed below. www.uksinc.com Link to comment Share on other sites More sharing options...
Georgeous Posted October 4, 2020 Share Posted October 4, 2020 where are they manufactured? and what is lead time? i use nordic bottles both 750ml and 1750ml t-top , but also need abiltiy for screw cap what can you do for me george@shiredistilling.com Link to comment Share on other sites More sharing options...
Uks Inc Posted October 5, 2020 Author Share Posted October 5, 2020 Please check your email for more information. Thanks! Al Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now