Jump to content

Recommended Posts

Distillery Turns Stillage Waste Into 

Revenue With Centrifugal Sifter

LEWISVILLE, TEXAS

Bendt Distilling Company, a maker of handcrafted whiskeys, uses a centrifugal sifter to turn spent grain byproduct into saleable livestock feed while recovering the liquid sour mash, a valuable component in the distilling process.

Founded in 2012 by Natasha and Ryan DeHart, Bendt Distilling currently produces 1200 barrels per year of straight whiskeys and whiskey blends, employing traditional distillation methods.

 

Dewatering stillage centrifugally

Grains including wheat, rye, barley malt, oats, corn and triticale (a hybrid of wheat and rye), are ground to the consistency of coarse flour, then mixed with water, cooked, mashed and fermented. After fermentation, the strip run (first round of distillation) separates out the alcohol from the 

fermented mash. The remaining grain/ water mixture called “stillage” consists of water containing 5 to 10 percent grain solids.

In its watery state, the stillage is a waste product to the distillery but contains enough grain and nutrients to be useful to farmers as livestock feed. Originally, Bendt pumped the stillage into a 20-cubic yard disposal container for pick-up by farmers at no charge. This saved the company disposal costs as long as the stillage was collected. If it wasn’t, the company had to pay to have it hauled away.

In researching a solution, DeHart read about another distillery’s use of a centrifugal sifter to dewater stillage. He contacted the manufacturer, who evaluated Bendt’s application and recommended a Kason model MO-3BRG.

The stillage now accumulates in a 10,000 gal (38,000 l) holding tank, and is pumped about once a week into the centrifugal sifter. The water/ grain mixture passes into the sifter’s horizontally-oriented cylindrical screening chamber where rotating helical paddles accelerate the mixture against the screen by centrifugal force. Liquid passes through the screen, exits through a flanged discharge chute at the base of the sifter and flows into discharge piping.

Oversize grain solids are propelled along the cylindrical housing until they exit the downstream end of the cylinder and gravity feed into a 20 cubic yard (15.3 cu m) enclosed container. The centrifugal sifter operates at a rate of 30-40 gal/min (114 to 151 l/min), so emptying the tank takes four to five hours.

The unit is 74 in. (1880 mm) long, including its motor, and 32 in. (813 mm) high. The stainless steel wedge wire screen is sized at 140 mesh (105 micron).

After dewatering, the grain still contains about 80% water but has a texture “you can hold in your hand,” DeHart says. A full container holds about 15 tons (13.6 m.t.) of grain, which is the yield of 20,000 gal (75,708 l) of stillage.

The liquid, called sour mash, is recovered and stored to add to subsequent fermentation batches. “Using sour mash saves water, provides flavor consistency, and naturally adjusts the pH,”

Ryan DeHart says.

Customizing the solution

Working with Kason’s applications engineers, Bendt Distilling Company identified solutions for problem areas, such as dealing with the sludgy consistency of the stillage at the bottom of the holding tank, which 

could cause the sifter to stall, and dealing with stillage containing corn (a byproduct of bourbon production), that holds more water than the other grains and tends to become spongy.

Kason’s solution was to run the unstable 208 3-phase supply more efficiently at a higher voltage by adding a transformer to step up the voltage. For the corn stillage, changing the screen mesh size and installing a higher-pitch paddle assembly pulls the stillage across the screen cylinder effectively while maintaining the same throughput and de-watering performance without any clogging or imbalance, allowing unattended operation.

Ease of cleanout was a big factor in choosing the sifter, DeHart says. “We can clean it quickly, getting to all the pieces. With the three-bearing design, the front of the sifter opens for cleaning and changing parts. Internal components slide freely from the shaft.”

The sifter’s compact design was also important for the distillery, as was its low power requirements “with just a 3 hp (2.2 kW) motor,” DeHart says. Heavy duty construction also suited the distillery as the sifter is installed outdoors. Finally, DeHart appreciates that the unit is relatively quiet.

“We’re really happy with the setup,” DeHart says. “It’s a good low-cost solution compared to what else is on the market for separating the grain at a fast speed.”

Turning an expense into revenue

Partnering with a national feed company, the distillery worked out an agreement with a local cutting horse farm to take the spent grain. Under a profit-sharing agreement with the feed company, the distillery receives income in addition to having the spent grain hauled away at no cost

The Kason centrifugal sifter has provided a “win-win” solution, DeHart says. “A waste byproduct for us is a useful product for somebody else.”

Kason Corporation (973) 467-8140 | info@kason.com | www.kason.com

 

Jim Ling

North American Sales Manager

Kason Corporation – Regional Sales Office

Southgate, KY 41071

Tel. / Fax 270-60-KASON

Review my background on LinkedIn

 

 

Kason-Bendt Distillery.pdf

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...