Jump to content

Recommended Posts

Posted

I am looking at finding a high temperature hose (something that could handle up to 200* F) to hook to the end of the 3" wide drain pipe on my still so I can feed it into our drain. Anyone have any suggestions as to what supplier I should use?

Here's the ball valve that will be at the end of the drain pipe.

http://www.copper-alembic.com/ns/product.php?id_product=307

Posted

Are you sure your municipality will let you put 200+ degree waste down the drain. In my area you can't dump above 150 degrees.

Posted

I have had good luck with Goodyear high temp hoses. Normally the problem is not only the heat but also the pH from cleaning chemicals. Have a rep from International Belt and Rubber come in and take a look at how you are going to use the hose. use this link to access their website. http://www.intlbeltandrubber.com/

Ed ~ Stubborn Rabbit

Posted

Are you sure your municipality will let you put 200+ degree waste down the drain. In my area you can't dump above 150 degrees.

Jeff, we have talked with the municipality and they do not have a problem as long as it is under 250 degrees. They were more concerned with the contents of the wash than it's temperature.

I have had good luck with Goodyear high temp hoses. Normally the problem is not only the heat but also the pH from cleaning chemicals. Have a rep from International Belt and Rubber come in and take a look at how you are going to use the hose. use this link to access their website. http://www.intlbeltandrubber.com/

Ed ~ Stubborn Rabbit

Thanks Ed, I will look into it.

Posted

Hey Sam- Call Associated Hose Products down in Portland. www.ahphose.com and talk to Trevor. He's got some good things for that. He's been super helpful for me.

Roy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...