Jump to content

Recommended Posts

Posted

 We have this unit in stock. This 20 gallon still is great for Bourbon, Whiskey, Brandy, Grappa, Rum, Vodka and many others.  It will distill between 120 and 170 proof with the 4 plate bubble plate column and up to 190 proof with the optional 4"x6' Vodka Column Extension added (shown on 45 gallon Standard Series still).

   This Still has the beautiful 4" Diameter Copper Bubble Plate Column option with four 4" diameter sight glasses, Gatling Gun (Tube & Shell) Dephlagmator on top of the column and a 2" Gatling Gun (Tube & Shell) Condenser on the right side of the column. The column can be ran in Pot Still Mode to make Whiskey and Moonshine or it can be ran in Reflux Mode to make high proof light Whiskey or Rum. The optional Vodka Column Extension Can be added to make Vodka. The boiler has two 2" Tri Clamp ports, with Tri Clamps and cover plates. The port can be used to install an electric element with controller (please see the heating system option listed below).

   The best thing about this 20 gallon still is that it is jacketed.  Cooking oil or water can be ran in the jacket.  This gives you the ability to run grain in mashes and other mashes such as potato mashes, grappa mashes and fruit mashes with the solids left in, without the worry of scorching.  This makes this still perfect for craft recipe research and development.  If you are running a production sized still with a pot still head/column or a plated column, we can build you a still that will give you flavor profile and proof results that should closely match your larger still.  We have options below for agitators and heating systems etc.

We also have these 20 gallon units in a combination Mash Tun Still Configuration.  These combination units can be used to both cook the mash and to distill the mash.  These units have the agitator center set on top and the column set towards the side.  There is no extra cost for the combination Mash Tun Still configuration.  The column actually produces a little better in this configuration.



 

20 Gallon Operating Capacity

26 Gallon Total Capacity

5 Gallon Jacket Operating Capacity

7 Gallon Total Capacity in the Jacket

 Sanitary Butterfly Drain valve

½” Jacket Drain Ball Valve

Carrying handles.

3" tri clamp column connection

½” 5 psi Pressure Relief Valve on the jacket

½” 5 psi Pressure Relief Valves on the inner boiler

3” Diameter Copper Packed Reflux Column

Top quality construction with beautifully rounded curves.

Built from heavy gauge 304 food grade stainless steel.

Commercial grade thermometer in the oil Jacket.

The column is completely modular with Sanitary Tri Clamp Connections throughout.

It is very simple easy and fast to disassemble the Column for Cleaning.

Plates can be added or removed from the column to run different proofs.

The Column can be set up to run as a Pot Still Head in a matter of 5 to 10 minutes.

1”x1.5” triclamp port for a temperature probe in the oil.

Polished to a mirror finish inside and out.

Thermowell and Commercial grade thermometer with a 3" face.


This item comes with a 1 year warranty which covers manufacturing defects and leaks.

Base Price for still boiler including drain valve hardware and safety devices $1,248.66

Base price for still boiler  including drain valve hardware and safety devices plus the 4 plate bubble plate column: $2,798.86

Base price for still boiler including drain valve hardware and safety devices plus the 4" copper whiskey column (not shown): $1,865.80

 

 

Options:

4"x6' Vodka column extension $794.00 with copper packing.  $694.00 with ceramic raschig rings.

1/2hp electric agitator single speed 45 RPM 3 phase 230VAC $1,455.00

Variable speed WEG VFD drive for 1/2hp agitator to be mounted on the wall NEMA1 enclosure. This VFDs enclosure is not rated for hazardous environments so it should go into a NEMA4x enclosure $285.00. This VFD can be wired 3 phase or single phase input, to supply power to the 3 phase agitator.

Variable speed WEG vfd drive for ½ hp agitator to be mounted on the wall. This VFD is Rated NEMA 4x for hazardous environments can be washed down. Price is $695.00. This VFD can be wired 3 phase or single phase input, to supply power to the 3 phase agitator

 

Copper 4" Gin basket option $300.00

 

 

Stainless Gin Basket $200.00

 

Push to connect cooling plumbing kit for 4" 4 plate column  = $52.31

 

Manual proportional control 11,000 watt heating system = $725.00  Not NEMA 11,000 watt heating system with digital programmable heating control.  Control panel and element enclosures are NEMA4X.  Price = $1,295.00

11,000 watt heating system with digital programmable heating control using all UL listed parts.  Control panel and element enclosures are NEMA4X.  Price = $1,915.00

Approx. 1 hr heat up time with the 11,000 watt controller

 

This still as set up below is great for Brandy, whiskey Bourbon, Moonshine Rum, and Gin. By making changes to the modular column sections this still can be used as a stripping still, pot still or 4 bubble plate column still.  This still has the copper gin basket in place.  If you like we can set the agitator in the center and set the column to the side so that this unit can be used to cook mash as well as all of the above.  This is a great R&D still or small production still. 

20 gallon 4 plate copper column copper gin basket testing Still.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...