Hudson bay distillers Posted April 2, 2017 Share Posted April 2, 2017 hello . im not sure if this is the right spot to ask this but here goes , as far as general maintenance and polishing of copper components what is a good product to use to clean and is there anything that can be used to seal copper surface with to keep it looking polished . we curently use citric acid and elbow grease then neutralise with soda wash to get a nice presentable shine , however after a few runs the copper components dull and become poor looking especially compared to the stainless steel components . it would be nice to put some type of coating on to keep it all looking good . thanks in advance tim Link to comment Share on other sites More sharing options...
indyspirits Posted April 2, 2017 Share Posted April 2, 2017 We too polished relentlessly the first few months but then took a more relaxed attitude and embraced the worn penny look. That and it takes a long damn time to keep it new looking. Link to comment Share on other sites More sharing options...
Hudson bay distillers Posted April 3, 2017 Author Share Posted April 3, 2017 thanks indy spirits for the reply , was hopeing to get away from the used penny look on our older equiptment to offset the huge contrast between the stainless , its not a big deal purely for looks lol doesnt hurt quality or production . i have ordered some high temp shalack i ll let u know if that works . if it doesnt work it will be a real pain to remove .... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now