Jump to content

will

Members
  • Content Count

    202
  • Joined

  • Last visited

  • Days Won

    1

will last won the day on January 7 2017

will had the most liked content!

Community Reputation

4 Neutral

About will

  • Rank
    Active Contributor

Recent Profile Visitors

2,522 profile views
  1. will

    label Printing software

    Sorry I was not clear...and maybe did not understand the true nature of the question. We used Avery labels for cartons, not for the bottles. Our bottles use labels that are professionally produced, ACL, digital, or offset printed. Look in the wine space for label stock suitable for bottles. It's a tough game trying to make product labels. Generally, if you're market testing a brand, prospective customers will understand the nature of prototype labels made in your kitchen...but transitioning to professionally produced labels has been important to us. As a labor savings if nothing else.
  2. will

    label Printing software

    At first, we used 2x2 per page Avery label stock. I think you're right - it was a Word template that Avery supplied. These made large labels that were fine for 6-pack and larger boxes. Later, we decided to switch to a smaller label (due to expense) with the carton barcode and a few other things noted, like the batch number, etc. IIRC, those were 3x10 per page. We felt that because the boxes were being thrown away by the retailer, the design of the boxes was not significant. We were below the scale of an end-cap display. Even then, white boxes would have been okay in my opinion. 8"x10" label pages in the above.
  3. will

    label Printing software

    In days gone by, we printed carton labels using Avery software and labels in a common desktop inkjet printer. Results were acceptable, though not stunning. Just searching for Epson C3500 software, it looks like Epson supplies a software solution called ColorWorks - which I have no experience with, but here's a YouTube video:
  4. will

    Weeping Barrels

    Your barrels should not be dripping at this stage. Start by speaking to your Cooper. We have a simple tool that's made for tightening the bands by pushing them toward the fat center of the barrel using a 5lb hammer. A few whacks usually clears the problem. IIRC, it's called a hoop driver.
  5. will

    Reusing condenser water for mashing

    nothing wrong with cooling water. only question is about the pvc hose on the hot side of the condenser. check the ratings. if it's rated food grade at temp, then it should not pick-up any plasticizers which could taste bad, but likely not make it through the distillation. won't hurt the wash. save water...good idea.
  6. will

    Best Way to Gauge Liqueurs?

    an inexpensive glass still and the required thermometer and hydrometer are what's needed. the procedure is in the gauging manual in 27cfr 30.32(c). in the process, distillation is used to remove the sugars (that are more dense than water and will push your hydrometer up making the amount of alcohol seem lower) with water. then you measure the proof in the usual way. let me say it again: replace the sugars with the amount of water the sugars displace. the trouble is that while you are making the batch, you actually can do the weights and arithmetic quite accurately, and your results will be spot-on, but when gauging for tax, you are required to use the prescribed method noted above. you might as well spring for the glass still now.
  7. will

    Alcohol Dilution

    Right, I presumed that it was a typo when you got the same answer using weight. I prefer weight because measuring volume is so problematic, but if everything is corrected back to 60F, then the results should be equal...as you've shown. My approach is similar to yours, but I OCRed Table 6, then used columns 2 & 3 to compute Alcohol and Water weights per gallon, and from that the weight of the mixture, and finally the weight% of alcohol for each proof. Using wt%, it's rather trivial to compute the present proof using the LOOKUP function in Excel. Simply search down the wt% column and find the value that's just below what you're searching for, and interpolate. Once that was done, I admit I got lazy, and rather than code the algebra, I just do a binary search (test & iterate) for the amount of product to add to get the proof I'm looking for. Takes less than a minute. Your results and mine differ by a few percent, and that's significant. Didn't I send you the spreadsheet a year ago or more?
  8. will

    Alcohol Dilution

    I'm getting a slightly different result. 33.9lbs - i'll try to track-down the source of that error. perhaps my .xls is not ready for prime time, so hang in there...
  9. will

    Newbie about liquors and liqeuers

    E300 - Ascorbic acid is the most commonly used color retention agent.
  10. will

    Alcohol Dilution

    PeteB: Part 1 is correct, nicely done. Part 2 is probably in the zone, but did you use .7(47....) or .71(47...)? that's an error of around 1.5%. Also, since you're "cheating" by using Alcodens, are you correcting back to 15.56C (60F)? Note that if you do this in wt%, you won't have to worry about temperature. Pressure9pa & HedgeBird: Contact me via PM, and I'll send you the scanned tables in excel format. I would post them here, but they're not pretty enough yet.
  11. will

    Alcohol Dilution

    Gary, You seem to have a grip on this stuff. Would you care to take a stab at the problem posted in 2009, and restated in post #27 directly above yours? We're still hoping to find someone who knows how to compute this stuff and is willing to share the approach. Will
  12. will

    Equipment Calibration

    is one of them plastic?
  13. will

    Fill level tolerances

    it's actually in 27 CFR 19.356 - variations of fill. for packages of 750ml, it's +-2% - not 0.2% - and that's +- 15ml. that's easy. as fat as a Cadillac. what they will focus on in an audit is whether you have records indicating that you test, and what the results are, and what corrections you made. again, it clearly says that you should have about the same number of overfills as underfills. will
  14. will

    Equipment Calibration

    according to the manufacturers, once you have a calibration chart, usually 5 points between 32 and 124F, checking with a distilled water ice bath is a sufficient calibration check to determine if the instrument has been damaged. Keeping records of these checks is a good idea. Scales are a bit different. You can take some object that's about 1/3 of capacity, and that won't change weight over time, like an old anvil, and use that as a check from time to time. Check it initially when you get the scale or when it's calibrated, then use the weight as a sanity check. Hydrometers are relatively difficult to check on your own, unless you have a bigger better instrument to check it against. We keep our calibrated hydrometers in a locked cabinet, and use them occasionally to check other hydrometers we use for production. We have a cylinder that will float two hydrometers. Good luck, Will
  15. will

    Fill level tolerances

    from one of the TTB guys who was at the ADI Conference: over relatively long periods of time, about the same number of overfills as underfills. there's no hard specification. the ttb relies on the industry to do a good job. before, during, and after bottling, if you take a sample of bottles, weigh them (and mark them with the weight), then fill them and weigh them again, you can easily convert weight back to volume. the net wt. of a 750ml bottle of a non-sugar containing product at 80 proof is 712 grams. weigh each after filling, compute the net weights, then the average weight, and adjust the equipment up/down to maintain 750ml average. keep records of these QC fill-checks, and you'll do fine. we have had so-called high quality bottles that have filled to very different levels when at 750ml (712g net) - so their internal volume was slightly different. we found a better source, but had to live with some funny looking fills for a while. good luck, will
×