WMD Tom Posted November 3, 2023 Share Posted November 3, 2023 First, I want to say that I am in no way throwing Headframe under the bus here. I really like John, and I think this still has potential, that being said... We purchased a used Heaframe CF-1000 from a distillery in NY that was going out of business. Headframe helped us move the still from NY with techs on site to help take it apart and load it onto trucks, and then helped us to get it back up and running in our facility. We have been banging our heads against the wall trying to get this thing to perform for quite some time now, and it's just one setback after another. It seems like we are taking it apart once a week to clean out a plugged up heat exchanger, or it pukes over the top of column one and makes a mess of the whole system. Im wondering if anybody has any experience with these stills that could tell me what we might be doing wrong. We have spent countless hours talking to headframe on the phone or via email, and don't seem to be making much progress. Our current process is fermentation on the grain, then remove the grain using an LSS. After the grain is removed we pump the wash to the still to be run. We are NOT distilling on the grain, I can only imagine how quick this thing would fail if we tried that. We are honestly almost to the point we are going to sell this still and replace it with a 2000 gallon pot still. Any help would be great! Thanks, Tom - Wise Men Distillery, Grand Rapids, Michigan. Link to comment Share on other sites More sharing options...
Kindred Spirits Posted November 6, 2023 Share Posted November 6, 2023 It might be good to jump on a call to discuss, if you have some time later this week, I would be happy to go through your process for you to try and help identify any issues I see. Link to comment Share on other sites More sharing options...
SlickFloss Posted November 8, 2023 Share Posted November 8, 2023 DM'd, I can probably help you get to a point where you can get clear liquid to come out of it when you want it to. I have one. Link to comment Share on other sites More sharing options...
oddcobb Posted November 8, 2023 Share Posted November 8, 2023 I've got one too if you want to chat about it. We still bang our heads against it, and it has some flaws but we are slowly getting it figured out. I'll send you a PM Link to comment Share on other sites More sharing options...
WMD Tom Posted November 13, 2023 Author Share Posted November 13, 2023 I really appreciate everybody that has reached out. It sounds like Im not alone in this. ... Sometimes I wish things just worked the way they are advertised Link to comment Share on other sites More sharing options...
Darren Bobby Posted Wednesday at 02:48 PM Share Posted Wednesday at 02:48 PM Have you made any progress with this issue? PM me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now