Skaalvenn Posted December 30, 2014 Share Posted December 30, 2014 Hello, We're looking for an affordable mash pump, something reasonable for a smaller distillery that's just starting out. I'd like something that won't clog with a grain in mash and/or cause me to pull my hair out and wish I never purchased it. If you have something or know of something please give me a holler. Thanks! Link to comment Share on other sites More sharing options...
Jedd Haas Posted December 30, 2014 Share Posted December 30, 2014 A good bet is to hunt on ebay frequently. Search terms: centrifugal pump, sanitary pump, impeller pump, lobe pump. Look for triclamp connections that are 1.5" or larger. Link to comment Share on other sites More sharing options...
Skaalvenn Posted December 30, 2014 Author Share Posted December 30, 2014 A good bet is to hunt on ebay frequently. Search terms: centrifugal pump, sanitary pump, impeller pump, lobe pump. Look for triclamp connections that are 1.5" or larger. Thanks, I have searched a couple of those terms but not all of them. I'll check it out I am a bit hesitant to use something which didn't come from a brewery/distillery as I have no idea what may have previously gone through the pump. Link to comment Share on other sites More sharing options...
ebstauffer Posted December 30, 2014 Share Posted December 30, 2014 What you call affordable? We're a small startup and scraped together funding for a US-FIP pump. Check them out here: http://www.americanwinepump.com/products.html I was really hesitant as it's a substantial investment but in my opinion well worth it. Link to comment Share on other sites More sharing options...
bluestar Posted December 30, 2014 Share Posted December 30, 2014 Thanks, I have searched a couple of those terms but not all of them. I'll check it out I am a bit hesitant to use something which didn't come from a brewery/distillery as I have no idea what may have previously gone through the pump. We went the ebay route. Key is to get a good standard pump type that is wash-down, food-grade sanitary, all stainless steel. They can be fully disassembled, cleaned, and put back together, which should allay concerns about previous use. We were able to get a $3000 pump for $600 that way, and it has served well for the past two years. Link to comment Share on other sites More sharing options...
Silk City Distillers Posted December 30, 2014 Share Posted December 30, 2014 Went eBay as well, we were able to get a two 2" sanitary positive displacement lobe pumps for a fantastic price. Most high quality sanitary pumps are primarily stainless and are designed to be cleaned, even aggressively so, so I wouldn't worry. In addition, these things are wildly expensive new, so more than likely, they were used in food or pharmaceutical production, as few other uses could justify the price tag new. One of pumps was used to make Aquafresh and Sensodyne toothpaste, the other one was an unused spare. We needed to fabricate a cart and wire up a VFD for speed control, but that's minor, overall we saved a small fortune. All in these two pumps would have probably cost us more than $15k new, I think we're in to them for about $1500. Link to comment Share on other sites More sharing options...
Towerguy Posted January 4, 2015 Share Posted January 4, 2015 EB, what size FIP did you get? We are considering these pumps, but wonder if a 2 inch would handle the abuse we will give it, or go a bit larger, to 2 1/2 inch. We need to move and "pump over" some pretty heavy grain mashes. Thanks, John Link to comment Share on other sites More sharing options...
Craft Distillery Resources Posted January 13, 2015 Share Posted January 13, 2015 The FIP pump is OK for small amounts of grain mash. But if you plan to move say 500 gallons a day plus, every day, it will not last. You will be rebuilding it. They,will not stand the abrasion of the grain. They stand up better than most flexible impellers than I have seen but they are expensive to maintain period. For the same money, you can buy a moyno style pump that will move any amount of grain mash you would like to. And a rebuild is half the price should you need one. Link to comment Share on other sites More sharing options...
Skaalvenn Posted January 13, 2015 Author Share Posted January 13, 2015 I ended up purchasing an air operated double diaphragm pump. For the price I couldn't pass it up and I'm hoping it works fine for now. 1.5" in and 1.25" out. *crosses fingers*, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now