Bcproduct Posted December 24, 2013 Posted December 24, 2013 It seems like this area does not get a lot of posting BUT, safety is important. This is a general question, but from all of you that are currently operating... You must have a "wow, that was lucky" story where you made a change in your set up, equipment or process to avoid hurting yourself or damaging equipment, facility, guests touring the plant.... Care to share?
Mash Posted December 24, 2013 Posted December 24, 2013 No... it would violate my 5th amendment rights. Don't let guests touch hot stills, or rest against them..... really it's not a good idea....... Trust me.
Artisan Still Design Posted December 25, 2013 Posted December 25, 2013 Hot steam pipes and cold steam pipes look exactly the same.
Sorghumrunner Posted December 27, 2013 Posted December 27, 2013 Hot steam pipes and cold steam pipes look exactly the same. Yeah, I learned that the first time I ran my steam boiler. It's a quick lesson.
mendodistilling Posted January 7, 2014 Posted January 7, 2014 Just spit on it, it will look different. haha. I am always amazed when people reach out and touch stills... even in distiller classes, its kinda like the darwin awards. "It boiling water, (reach out and touch with hand), OH MY GOD, THATS HOT!" Don't errogantly carry glass carboys, its ok to buy one of those straps to lift it. Accidents happen, glass and spilled liquor don't mix well. Drive into something with the forklift because it was easier to lift the load over the obstacle than to make a 3 point turn, then forget to lower it fast enough to clean a high wall opening. (Not get in a hurry in a forklift)
Artisan Still Design Posted January 9, 2014 Posted January 9, 2014 there has been many a time that I've seen the the "neck" of a glass carboy snap off, because someone picked it up from the neck instead of the bottom. I've also seen someone slice the hell out of their hand trying to catch a carboy with the neck snapped off, while falling through the air. if you must use glass for collection or storage, move it around on a cart, don't carry or lift while full. Huge potential for accident, injury and fire.
Charles@AEppelTreow Posted January 9, 2014 Posted January 9, 2014 I got rid of all my glass in favor of SS kegs. Cornelious and Sankey. After having a 15 gal demijohn of pyment turn itself into shards while I was moving it. As a safety practice, sharing near misses is a good thing.
leftturndistilling Posted January 9, 2014 Posted January 9, 2014 Heres a good one .... Just relabeled the neck labels of 480 bottles because one of the volunteers was using hand lotion !!!.... Of course I found this right after palletizing 56 cases !!!... Hoorahhhh !!!!,, :(
Panoscape Posted January 30, 2014 Posted January 30, 2014 We just threw out our last glass carboy and have switched over to SS kegs. We're so over broken carboys, lost product and close calls with big hunks of sharp glass. Plus, the floor sealant we purchased said it could withstand ethanol... I beg to differ.
Jedd Haas Posted January 30, 2014 Posted January 30, 2014 I guess it was a blessing in disguise that our Fire Marshal wouldn't allow glass carboys. We've been using 5 gallon corny kegs, which are great.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now